Parkside PARM 20-Li A1 handleiding
Handleiding
Je bekijkt pagina 20 van 50
ֺ
|
ֺGB / IE / NI
7KHGLƙHUHQFHEHWZHHQPRZLQJDQG
mulching
When using the mulching kit o, the grass
cuttings are not collected in a catcher but
shredded and distributed on the lawn.
The nutrients contained in the lawn clip-
pings are thus broken down by soil organ-
isms and form a nutrient cycle. Mulched
lawns therefore need to be fertilised much
less frequently.
As a rule of thumb, the lawn needs to be
mowed relatively often so that only small
amounts of mulch remain on the lawn.
Ideally, you should mulch the lawn at least
once a week and the mower should be
set so that only about 40% of the total
height of the lawn is mulched. If too mulch
is left on the lawn (for example, during the
ƞUVWODZQFXWRIWKH\HDURUGXULQJVWURQJ
JURZWKXVHWKHJUDVVFDWFKHU8.
Cleaning, maintenance and
storage
WARNING5,6.2),1-85<
$OZD\VVZLWFKWKHDSSOLDQFHRƙ
and remove the battery before
carrying out any work on the
appliance.
+DYHDQ\ZRUNWKDWLVQRWGHVFULEHGLQ
these instructions carried out by a cus-
tomer service centre authorised by us. Use
only original parts.
Always wear safety gloves when
handling the blade.
Before all maintenance and repair work,
VZLWFKWKHDSSOLDQFHRƙ
and wait until the
blade is at a complete standstill. There is a
risk of personal injury.
General cleaning and maintenance
work
:$51,1*
■ 'RQRWVSUD\WKHODZQPRZHUZLWKZD-
ter. There is a risk of electric shock.
■ Keep the appliance clean at all times.
Use a brush or cloth for cleaning, but
do not use cleaning agents or sol-
vents.
■ After mowing, use a piece of wood
or plastic to remove any plant debris
adhering to the wheels, the air vents,
the discharge opening and the blade
area. Do not use any sharp or pointed
REMHFWV<RXFRXOGGDPDJHWKHDSSOL-
ance.
■ Check the lawnmower before every
use for obvious problems such as
loose, worn or damaged parts. Check
that all nuts, bolts and screws are
tight.
■ Check covers and guards for damage
DQGFRUUHFWƞW5HSODFHWKHPLIQHF-
essary.
5HSODFLQJWKHEODGHVHHƞJ-
If the blade is blunt, it can be sharpened by
a specialist workshop. If the blade is dam-
aged or unbalanced, it must be replaced.
♦ Remove the battery pack p from the
appliance.
♦ Turn the appliance over.
♦ Use sturdy gloves and hold the blade
dƞUPO\8QVFUHZWKHEODGHEROWs by
turning it anticlockwise with a wrench
VSDQQHUVL]HDQGUHPRYHLWIURPWKH
motor spindle f.
♦ Fit the new blade d in the reverse order.
Make sure that the blade d is correctly
positioned and the blade bolt sLVƞUPO\
tightened.
Bekijk gratis de handleiding van Parkside PARM 20-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PARM 20-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5608 MB |
