Parkside PARM 20-Li A1 handleiding
Handleiding
Je bekijkt pagina 11 van 50
GB / IE / NIֺ
|
ֺ
GDo not abuse the cord. Never use the
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges or moving
parts.'DPDJHGRUHQWDQJOHGFRUGVLQ-
crease the risk of electric shock.
H When working outdoors with an elec-
trical power tool always use extension
cords that are also suitable for use
outdoors. Use of a cord suitable for
outdoor use reduces the risk
of electric shock.
I If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected sup-
ply.8VHRIDQ5&'UHGXFHVWKHULVNRI
electric shock.
3HUVRQDOVDIHW\
D Stay alert, watch what you are doing
and use common sense when operat-
ing a power tool. Do not use a power
tool while you are tired or under the
LQƟXHQFHRIGUXJVDOFRKRORUPHGL-
cation. A moment of inattention while
operating a power tool may result in se-
rious personal injury.
EUse
SHUVRQDOSURWHFWLYHHTXLSPHQW
Always wear safety goggles. Protective
equipment such as a dust mask, non-
skid safety shoes, hard hat or hearing
protection used for appropriate
conditions will reduce personal injuries.
F Prevent unintentional starting. Ensure
WKHVZLWFKLVLQWKHRƙSRVLWLRQEHIRUH
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools with your
ƞQJHURQWKHVZLWFKRUHQHUJLVLQJSRZHU
tools that have the switch on invites
accidents.
GRemove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotat-
ing part of the power tool may result in
personal injury.
H Do not overreach. Keep proper foot-
ing and balance at all times. This en-
ables better control of the power tool in
unexpected situations.
I Dress properly. Do not wear loose
clothing or jewellery. Keep your hair
and clothing away from moving parts.
/RRVHFORWKHVMHZHOOHU\RUORQJKDLUFDQ
be caught in moving parts.
J If devices are provided for the con-
nection of dust extraction and collec-
tion facilities, ensure these are con-
nected and properly used.
Use of dust collection can reduce
dust-related hazards.
K Do not allow yourself to get lulled into
a false sense of security and do not
ignore the safety regulations for pow-
er tools, even if you are familiar with
the power tool after repeated use. A
careless action can cause severe injury
within a fraction of a second.
4. Power tool use and care
D Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
EDo not use the power tool if the
VZLWFKGRHVQRWWXUQLWRQDQGRƙ Any
power tool that cannot be controlled with
the switch is dangerous and must be
repaired.
F Disconnect the plug from the pow-
er source and/or remove the battery
pack, if detachable, from the power
tool before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
Bekijk gratis de handleiding van Parkside PARM 20-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PARM 20-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5608 MB |
