Parkside PAR 12 B2 handleiding
Handleiding
Je bekijkt pagina 11 van 141
GB
│
IE
│
7 ■
PAR 12 B2
Inserting/removing the battery pack
Inserting the battery pack
♦ Snap the battery pack4 into the handle2.
Removing the battery pack
♦ Press the two release buttons3 and remove
the battery pack4.
Checking the battery charge level
♦ Press the ON/OFF switch5 to check the
charge level of the battery.
The status/remaining charge will be shown on
the battery charge level display1 as follows:
RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Use
Select direction of rotation
WARNING!
► The rotation direction switch9 may only
be used/adjusted when the appliance is at a
standstill.
♦ Select the direction of rotation by moving the
rotation direction switch9 to the right or left.
Switching on/off
Turn on
♦ Press and hold down the safety lock-out6.
Then press and hold the ON/OFF switch5.
Once the machine is running, you can release
the safety lock-out 6. The LED work light7
lights up when the ON/OFF switch5 is
pressed lightly or fully.
This provides illumination of the work area in
poor lighting conditions.
NOTE
► Pressing the ON/OFF switch5 lightly yields
a low speed/torque. Increasing the pressure
increases the speed/tightening torque.
Switching off
♦ Release the ON/OFF switch5.
CAUTION!
♦ The tightening torque actually attained must
always be checked with a torque wrench!
Attaching the adapter
♦ Push the adaptere onto the tool holder8.
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The appliance is maintenance-free.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Never allow liquids to get into the appliance.
■ Use a dry cloth to clean the housing. Never use
petrol, solvents or cleansers which can damage
plastic.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
► Replacement parts that are not listed (such as
batteries, switches) can be ordered via our
Service Hotline.
Bekijk gratis de handleiding van Parkside PAR 12 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PAR 12 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15491 MB |
