Parkside PAMSG 20-Li A1 handleiding
Handleiding
Je bekijkt pagina 6 van 33
2
|
GB / IE / NI
Introduction
Congratulations on the purchase
of your new appliance. You have
selected a high-quality product.
The operating instructions are part of this
product. They contain important informa-
tion about safety, usage and disposal.
Before using the product, please familiarise
yourself with all instructions regarding safety
and use. Use the product only as described
and for the specied range of applications.
Please also pass on all documents to any
future owner.
Intended use
The appliance is suitable for dry sanding
of wood, metal and paint.The appliance is
particularly suitable for corners, edges and
hard-to-reach areas. Any other usage or
modication of the appliance is deemed to
be improper and carries a signicant risk
of accidents. The manufacturer accepts
no responsibility for damage(s) resulting
from improper usage. This appliance is not
intended for commercial use.
Features
(See fold-out page for illustrations)
1 Release button
2 On/O switch
3 Sanding sheet
4 Positioning aid
5 Adapter connection
6 Adapter for dust extraction
7 Dust box
8 Sanding pad
9 Sanding sheet alignment tool
0 Battery pack*
q Charger*
* BATTERY AND CHARGER ARE NOT SUPPLIED
Package contents
1 20V orbital sander
4 sanding sheets (60/80/120/240 grain)
1 dust box
1 positioning aid
1 adapter for dust extraction
1 sanding sheet alignment tool
1 set of instructions for use
Technical data
Rated voltage 20 V (DC)
Rated idle speed n
0
12000 rpm
Nominal oscillation
speed 24000 rpm
Orbital radius: 1.6 mm
Sanding sheet: Ø 125 mm
Noise and vibration data
Noise measurement value determined in
accordance with EN62841. The A-weighted
noise level of the power tool is typically:
Sound pressure level L
PA
= 91.3 dB
Sound power level L
WA
= 99.3 dB
Uncertainty K = 3 dB
Wear ear mus!
Vibration values (vector sum of three
directions) determined in accordance with
EN62841:
Vibration emission
value max. a
h, W
= 10.901 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
► The vibration emission values and noise
emission values given in these instruc-
tions have been measured in accord-
ance with a standardised test procedure
and can be used for comparison of the
power tool with another tool.
► The specied total vibration values and
the noise emission values can also be
used to make a provisional load estimate.
IB_456543_PAEXSG20-LiA1_LB6.indb 2IB_456543_PAEXSG20-LiA1_LB6.indb 2 27.06.2024 08:28:0327.06.2024 08:28:03
Bekijk gratis de handleiding van Parkside PAMSG 20-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PAMSG 20-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3878 MB |
