Parkside PAK 20-Li A1 handleiding
Handleiding
Je bekijkt pagina 12 van 33
PAK 20-Li A1 / PALP 20-Li A1
■ 8
│
GB
│
IE
│
NI
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
♦ Allow the battery pack to click into the
handle.
Removing the battery pack:
♦ Press the release button and remove the
battery pack .
Checking the battery charge level:
♦ Press the battery charge level button to
check the battery charge level.
The status/remaining charge will be shown on
the battery display LED as follows:
♦ RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Operating the cordless air
pump PALP 20-Li A1
This appliance is not designed for continuous
operation. The appliance may be used for a maxi-
mum of 20 minutes of continuous operation. If the
appliance overheats, remove the battery pack .
Allow the appliance to cool down completely and
then try using it again.
Inflation
♦ Remove the valve cap of the item you want to
inflate.
♦ Fit the appropriate adapter , or onto
the pump air outlet .
♦ Push the adapter , or into the valve of
the item to be inflated.
♦ Turn on the device by pressing the ON / OFF
switch .
♦ When the desired fill volume has been reached,
switch off the device by pressing the ON / OFF
switch again.
♦ Now remove the adapter , or .
♦ Replace the valve cap on the item that you have
inflated.
Deflation
♦ Fit the appropriate adapter , or onto
the pump air inlet .
♦ Remove the valve cap of the item you want to
deflate and push the adapter , or into
the valve of the item to be deflated.
♦ Switch the appliance on by pressing the
ON/OFF switch .
♦ Once the item is fully deflated, switch off the
appliance by pressing the ON/OFF switch
again.
♦ Now remove the adapter , or .
Adapters
Adapter :
For standard valves with an internal diameter of
8 mm.
Adapter :
For inflatable items with a screw valve. Deflation
is only possible with an unscrewed valve and with
this adapter.
Adapter :
For inflatable items with a deflation valve.
NOTE
► The LED work lamp lights up as soon
as you press the ON / OFF switch . This
allows illumination of the working area while
inflating in low light conditions.
Bekijk gratis de handleiding van Parkside PAK 20-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PAK 20-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3542 MB |
