Parkside IAN 380768 handleiding
Handleiding
Je bekijkt pagina 14 van 181
PLG 20 C3
■ 8
│
GB
│
IE
ATTENTION!
♦ If the red control LED
flashes, this means that the battery
pack has overheated and cannot be charged.
♦ If the red and green control LEDs
both flash, this means
that the battery pack is defective.
♦ Push the battery pack
into the appliance.
♦ Switch off the charger for at least 15 minutes between successive
charging sessions. Also disconnect the power plug from the mains
power socket.
Checking the battery charge level
♦ Press the battery charge level button to check the status of the
battery (see also main diagram). The status/remaining charge
will be shown on the battery display LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Cleaning
CAUTION!
► Always unplug the charger before cleaning it.
► Do not clean the charger with water.
■ Clean the appliance with a dry cloth or brush. Do not use water
or metallic objects.
Maintenance and storage
■ If you do not intend to use the appliance for an extended period,
remove the batteries and store it in a clean, dry place away from
direct sunlight.
Bekijk gratis de handleiding van Parkside IAN 380768, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | IAN 380768 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11663 MB |
