Parkside HG09673 handleiding
Handleiding
Je bekijkt pagina 20 van 27
17
GB/IE/NI
2. Connect the mains plug
5
to a socket-outlet.
3. When the rechargeable battery is fully charged,
remove the rechargeable battery from the charger.
Disconnect the mains plug from the socket-outlet.
Wall mounting
m
WARNING! RISK OF INJURY!
When drilling, be careful not to damage any supply
lines. Use suitable search devices to find these or
consult an installation plan for guidance. Contact with
electrical cables can lead to electric shock and fire.
Contact with a gas pipe can result in an explosion.
Damage to a water pipe can lead to property
damage and electric shock.
INFO:
The charger
6
can be used either free-standing or
mounted on the wall.
1. To mount the charger
6
on the wall, place 2 screws
76.2 mm apart as specified in Fig. B on a wall, using
2 dowels.
2. To secure the charger, use round-head screws with
screw head diameter of 7–8 mm. Leave the screw
head protruding at a distance of approx. 8 mm from
the wall.
3. Hang the charger
6
on the 2 screws using the
mounting holes
9
located on the underside.
Bekijk gratis de handleiding van Parkside HG09673, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | HG09673 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1115 MB |
