Parkside 4V PAS D7 handleiding
Handleiding
Je bekijkt pagina 17 van 82
16 GB/IE/NI
The appliance is suitable for
indoor use only.
Residual risks
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain.
The following dangers can arise in connection
with the structure and design of this product:
Health defects resulting from vibration
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
Injuries and damage to property due to
broken accessory tools or the sudden
impact of hidden objects during use.
Danger of injury and property damage
caused by flying objects.
NOTE
u This product produces an electromagnetic
field during operation! This field may
under some circumstances interfere with
active or passive medical implants! To
reduce the risk of serious or fatal injury,
we recommend persons with medical
implants to consult their doctor and the
medical implant manufacturer before
operating this product!
Use
Battery information
o The built-in battery is supplied partially
charged. Li-Ion batteries can be charged at
any time without adversely affecting their
service life. Interruption of the charging
process will not damage the battery.
o If the battery status LED[3] lights up red
during use, the battery is at less than 30 %
of its capacity and needs to be charged.
o Never charge the product when the
ambient temperature is below +4 °C
or above +40 °C. The storage climate
should be cool and dry and the ambient
temperature should be between 0 °C and
+50 °C.
o This product has a built-in rechargeable
battery which cannot be replaced by the
user. The removal or replacement of the
rechargeable battery may only be carried
out by the manufacturer or his customer
service or by a similarly qualified person in
order to avoid hazards. When disposing
of the product, it should be noted that this
product contains a rechargeable battery.
Start charging
(Fig. B)
o Connect the USB cable[] to the USB port
(Type A)
[] of the charger[].
o Connect the other end of the USB cable[]
to the USB Type C socket[6].
o Connect the charger[] to a socket-outlet.
o The battery status LED[3] shows the
charging status:
Battery status
LED
[3]
Charging status
Red Charging
Green Battery is charged up
NOTE: It is normal for the handle to warm
up slightly whilst charging.
Stop charging
o Disconnect the USB cable[] from the
product.
o Disconnect the charger[] from the socket-
outlet.
Bekijk gratis de handleiding van Parkside 4V PAS D7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | 4V PAS D7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8840 MB |
