Pardini TR20 500 handleiding
Handleiding
Je bekijkt pagina 9 van 28
9
TRIGGER ADJUSTMENT TR20
ALL ADJUSTMENTS SHOULD BE CARRIED OUT HOLDING THE PISTOL UPSIDE
DOWN. CARE SHOULD BE TAKEN WHEN ADJUSTING THE MECHANISM. NEVER
TURN ANY SCREW MORE THAN 1/4 OF TURN AT A TIME.
SCREW RG: Unscrew to adjust trigger position.
SCREW CS: Turn clockwise to lengthen second stage travel and vice versa until
it disappears (single stage trigger).
SCREW PS: Inside screw CS. Turn clockwise to increase second stage weight
and vice versa.
SCREW PG: This regulates the disconnector engagement on the sear.
Turn clockwise to reduce the freeplay before the first stage trigger.
SCREW PP: Give a wide range of adjustment in the 1st stalle weight. Turning
clock wise increases the weight to over 1360 grams and vice versa
reduces the weight to less then 1000 grams.
SCREW TS: This function as an adjustable trigger-stop. Turn clockwise to
reduce over-travel. CAUTION: if this screw is adjusted too far
clockwise, the trigger will lease to function.
SCREW CP: Turn clockwise to reduce first stage travel. CAUTION: if this screw
is adjusted too far clockwise the sear will not re-engage.
Once the desired adjustment is achieved. ALWAYS re-adjust
screw PG, to ensure that the disconnector is correctly adjusted on
the sear.
Bekijk gratis de handleiding van Pardini TR20 500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pardini |
| Model | TR20 500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9102 MB |
