Pardini GPR1 EVO handleiding
Handleiding
Je bekijkt pagina 36 van 41
36
MODEL GPR 1
AIR CYLINDER REPLACEMENT AND RECHARGING
The air cylinder can be replaced at any times even if not completely empty. To recharge an empty cylinder, proceed as follows:
1) Unscrew the cylinder from the rifle.
2) Attach the recharging adaptor (supplied) either to an air supply bottle,or a compressor delivering 250 bar, or to a manual
pump available on request from Pardini Armi.
3) Attach the cylinder to the adaptator and either turn the bottle or compressor’s tap on, or act on the manual pump.
4) Wait for a few seconds for the air to be transferred to the cylinder, when using either an air bottle or compressor and in
all cases ensure the cylinder pressure reaches 250 bar.
5) Finally close the supply bottle/compressor tap and unscrew the cylinder from the charging device.
The cylinder is supplied with a manometer.
WARNING
When installing a newly lled cylinder only hand tight! Keep the threaded
portion of the connector lubricated with a simple lubricant.
• Please only use original Pardini air Cylinders
• Do not use the compressed air cylinders longer then 10 years.
• After 10 years from the manufacturing date the compressed air cylinder must be completely emptied to avoid any kind of risk.
• The shooter is responsible to observe all rules and regulations, which are also part of the manual.
• We do not assume any responsibility for any damage that might arise
from modifying parts, the use of parts which are not original Pardini or the non-observance of the manual.
MAX
10 YEARS
MAX
250 BAR
-20°C
+70°C
YEAR OF
PRODUCTION
Bekijk gratis de handleiding van Pardini GPR1 EVO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pardini |
| Model | GPR1 EVO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12590 MB |
