Handleiding
Je bekijkt pagina 81 van 87
72
Mottles and
spots
• Toner cartridge is dirty or leaking.
• The print media does not meet the
usage specification. For example, the
print media is textured, damp, or too
rough.
• The paper used has been stored in the
air for a prolonged time.
• The toner cartridge is not installed
correctly.
• The print mode is set incorrectly.
• The feed channel is dirty.
• If toner spots appear when copying
and scanning, the platen glass may be
dirty.
• The scanner is dirty or damaged.
• Imaging module is damaged.
• Please contact the customer service
center.
• Please properly use the print media
within the specification range.
• Keep the paper in its original wrapper
before use.
• Pull out the toner cartridge, remove it,
and then insert it again.
• Readjust the transfer parameters.
• Clean the feed channel.
• Clean the platen glass.
• Replace the imaging module.
Paper crooked
• The tray fails to load the media
properly.
• The paper used has been stored in the
air for a prolonged time.
• Please load the paper correctly.
• Keep the paper in its original wrapper
before use.
Print is crooked
or skewed
• The tray fails to load the media
properly.
• The print media does not meet the
usage specification. For example, the
print media is textured, damp, or too
rough.
• The paper used has been stored in the
air for a prolonged time.
• The feed channel is dirty.
• Please load the paper correctly.
• Please properly use the print media
within the specification range.
• Keep the paper in its original wrapper
before use.
• Clean the feed channel.
Single color or
black images
• The toner cartridge is not installed
correctly.
• If all-black image appear when copying
and scanning, maybe it is scanning
exposure, and the cover on the
manuscript is not properly closed.
• The scanner is damaged.
• Imaging module is not installed
properly.
• Imaging module is damaged.
• Pull out the toner cartridge, remove it,
and then insert it again.
• Please close the cover on the
manuscript, and then carry out copying
and scanning.
• Please contact the customer service
center.
• Remove the imaging module and
reinstall it.
• Replace the imaging module.
Bekijk gratis de handleiding van Pantum CM230ADN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pantum |
| Model | CM230ADN |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 15427 MB |
