Panduit PES400 handleiding
Handleiding
Je bekijkt pagina 33 van 52
© Panduit Corp. 2018
OPERATION MANUAL
PES400
ENGLISH
PES400: PA28981A01_01 Page: 32 of 51 4-2018
4.2.9 Loading Marker Plates
3.375” (86mm) or 3.5” (89mm) Plate Width
a. Stack plates with Easy Feed humps up [Figure 21].
b. Place weight on top of marker Plates
c. Wide end of weight goes up. Cutouts are to clear Easy
Feed humps.
1.72” (43mm) Plate Width
a. For plates heights of 1.72” (43mm), move the RH gate to
the right.
b. Insert plates for embossing in the loader on the left side
of the machine [Figure 22] on support block.
c. Place weight(s) on top of marker Plates. Cutouts are to
clear Easy Feed humps.
d. Close RH gate and tighten RH side wall knob.
e. Tighten the RH side wall using the side thumbscrew.
Figure 21
Loading 3.5” (89mm) wide plates
Figure 22
Loading 1.72" (43mm) Wide plates with
RH gate moved to right
4.2.10 Side Eject Guide Plate Adjustment:
a. Loosen side eject guide plate thumbscrews, slide guide plate until the
arrows on the back of the guide plate line up with the appropriate plate
height [Figure 23] on the positioning label.
b. Ensure the guide plate is straight and tighten thumbscrew.
c. Close embosser cover
Bekijk gratis de handleiding van Panduit PES400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panduit |
| Model | PES400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23253 MB |
