Panduit PES400 handleiding
Handleiding
Je bekijkt pagina 27 van 52
© Panduit Corp. 2018
OPERATION MANUAL
PES400
ENGLISH
PES400: PA28981A01_01 Page: 26 of 51 4-2018
4.2.5. Gate Height Adjustment
a. Loosen the 2 gate screws until gate moves freely up and down. Use your hand
or a 3/16 Inch Allen wrench [Figure 9].
b. Insert feeler gauge matching recommended plate gate height, see [Table 2];
under the gate foot [Figure 9].
c. Firmly press gate down onto gauge so the foot is level [Figure 15] while
tightening gate thumb screws to snug (15 in-lbs).
d. Check correct gate height by re-inserting the gauge under the gate foot. The
gauge used should go in.
e. Then attempt to insert the gauge .001” (.025mm) larger than maximum of
working range. The larger gauge should not fit.
f. Repeat with the other gate.
Bekijk gratis de handleiding van Panduit PES400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panduit |
| Model | PES400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23253 MB |
