Panduit MIM125 handleiding
Handleiding
Je bekijkt pagina 5 van 14
MIM094 / MIM125 / MIM187 OPERATION MANUAL
PA25213A01_01 Page: 4 of 13 8-2007
SECTION 3: FUNCTION OF CONTROLS (Refer to Figure 1 on Page 3)
1. ADJUSTABLE TENSION BLOCK SCREW – By turning the brass screw, the tension on the dial
can be adjusted. If the tension is too light, it may not allow the dial to seat properly; and will
make the dial difficult to move.
2. OPERATING HANDLE – The operating handle, when depressed, moves the table up and
down.
3. TABLE STOP CLAMP – The stop limits the right hand travel of the table, which controls the left
margin.
4. DEPTH OF IMPRESSION SCREW – The depth of impression adjustment screw limits the
upward travel of the table. Turning the screw outward (clockwise), will allow the table to move
further upward.
5. TABLE RELEASE LEVER – By depressing this handle, the table can be manually moved to the
right margin stop.
6. SPACING ADJUSTMENT SCREW –The screw has a jam nut, which must loosen for
adjustment. This screw limits the downward travel of the table. Turning the screw inward
(upward) will allow the table to move further downward. By adjusting the downward limit of the
table travel, letter spacing can be controlled.
Note: Before adjustment, the machine may single space, fail to space, or create multiple
spaces. For each different character size or if material thickness changes, an adjustment
may need to be made. During adjustment, make sure the handle is returned to the full
upright position.
7. TABLE INSERT LOCKING SCREW – This screw secures the table insert. After loosening the
screw, the insert can be moved backwards and forwards. Engraved markings on the left hand
edge of the insert are provided for reference purposes. Each increment measures 1/16”. An
arrow index is stamped on the left hand side.
8. DIAL SELECTOR KNOB – The dial selector knob positions the character to be stamped. A
pointer, fastened to the top of the casting above the dial, points to the character selected.
Caution: Be careful not to accidentally stamp the table. KEEP HANDS CLEAR OF
THE TABLE. Each time the handle is depressed, a character is stamped and the table
moves one space to the left. Moving the handle a half stroke and back up, will advance
the table without stamping a character. It is important to make sure the handle is
returned to its full up-right position, otherwise the table will not space properly.
Bekijk gratis de handleiding van Panduit MIM125, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panduit |
| Model | MIM125 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3758 MB |
