Panduit AR4P96WH handleiding
Handleiding
Je bekijkt pagina 15 van 16
For Technical Support: www.panduit.com
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2025
V00029MX_08
Page 15 of 16
Wire
retainer
clips
WR5E-X-Wire Retainer clips
To install Wire Retainer clips,
place open end of clip around
the leg of a finger on the verti-
cal cable manager.
Spool Removal/Replacement
Step 4: Pull back on angled flange
while applying upward
pressure.
Step 5: Repeat steps 1-3.
Step 2: Push buttons through back-
bone until mounting face is
flush with backbone.
Installation of Hole Blanking Plugs (PR2VBPK)
Press disks over pass through holes and press
into place.
Angled flange
Step 3: Apply downward pressure until plastic
spool clicks into place.
Mounting
face
Mounting Leg Slots
Fingers removed for
clarity
Step 1: Align buttons with mounting leg slot
Installation of Spools (PRSP5, PRSP7 or FDUSP)
Installation of Grommet Kit
(PR2VGK) Press grommets over
pass through holes and press into
place.
Other Compatible Accessories (sold separately) (cont.)
Bekijk gratis de handleiding van Panduit AR4P96WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panduit |
| Model | AR4P96WH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3635 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Breedte | 515.9 mm |
| Diepte | 1066.8 mm |
| Hoogte | 2441.7 mm |
| Maximale gewichtscapaciteit | 907.2 kg |
