Pando I-1001 handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 20 van 52
INOXPAN S.L.
V1550 N ECO:
EN INSTALLATION
13
20
V2450 N ECO:
Should be installed with a Ø200mm conduit, a different diameter will aff
ect the performance
of the motor, reducing its suction capacity, increasing noise produced as well as causing
other
problems.
The recommended length of the conduit between the hood and the motor is 4
-
6 m
maximum, a greater distance will reduce the motor'
s suction capacity, while a shorter
distance will increase the noise of the hood, if the latter case in inevitable, we recommend
the use of soundproofing
elements.
It is recommended that the conduit from the hood to the motor is without sharp angles, as
th
ey will reduce the suction capacity of the motor. If they are inevitable, try to ensure they
are not too close to the inlet or outlet of the motor (at least 0.5m away). Do not use elbow
joints of less than 90º, or place one after another, the minimum recommended distance
between them is 1m,
and try to make them as open as
possible.
The maximum total length of the conduit from the hood to the exterior should be 1
2 linear
metres, not counting elbow joints (one elbow joint is equivalent to 2.5 linear metres),
any
longer and the suction capacity of the motor will be
reduced.
V2600 ECO:
Should be installed with a Ø200mm conduit, a different diameter will aff
ect the performance
of the motor, reducing its suction capacity, increasing noise produced as well as causing
other
problems.
The recommended length of the conduit between the hood and the motor is 6
-
8 m
maximum, a greater distance will reduce the motor'
s suction capacity, while a shorter
distance will increase the noise of the hood, if the latter case in inevitable, we recommend
the use of soundproofing
elements.
It is recommended that the conduit from the hood to the motor is without sharp angles, as
th
ey will reduce the suction capacity of the motor. If they are inevitable, try to ensure they
are not too close to the inlet or outlet of the motor (at least 0.5m away). Do not use elbow
joints of less than 90º, or place one after another, the minimum recom
mended distance
between them is 1m,
and try to make them as open as
possible.
The maximum total length of the conduit from the hood to the exterior should be 1
2
linear
metres, not counting elbow joints (one elbow joint is equivalent to 2.5 linear metres),
any
longer and the suction capacity of the motor will be
reduced.
longer and the suction capacity of the motor will be
reduced.
metres, not counting elbow joints (one elbow joint is equivalent to 2.5 linear metres),
any
The maximum total length of the conduit from the hood to the exterior should be 12
linear
between them is 1m,
and try to make them as open as
possible.
joints
of
less
than
90º,
or
place
one
after
another,
the
minimum
recommended
distance
are not too close to the inlet or outlet of the motor (at least 0.5m away). Do not use elbow
they will reduce the suction capacity of the motor. If they are inevitable, try to ensure they
It is recommended that the conduit from the hood to the motor is without sharp angles, as
the use of soundproofing
elements.
distance will increase the noise of the hood, if the latter case in inevitable, we recommend
maximum,
a
greater
distance
will
reduce
the
motor's
suction
capacity,
while
a
shorter
The
recommended
length
of
the
conduit
between
the
hood
and
the
motor
is
4
-
6
m
other
problems.
of the motor, reducing its suction capacity, increasing noise produced as well as causing
Should be installed with a Ø150mm conduit, a different diameter will affect the performance

Bekijk gratis de handleiding van Pando I-1001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkPando
ModelI-1001
CategorieAfzuigkap
TaalNederlands
Grootte8513 MB

Caratteristiche Prodotto

Soort bedieningKnoppen
Kleur van het productRoestvrijstaal
Ingebouwd displayNee
Breedte1400 mm
Diepte650 mm