Handleiding
Je bekijkt pagina 92 van 160
•
•
•
•
•
•
•
•
When the operation is completed, the channel at the lowest position will be displayed.
Set Dual Tuner Mode to On to select satellite signal for TV>IP server function.
Antenna, Cable
Scan Mode
Normally set Frequency , Symbol Rate and Network ID to Auto . If Auto is not displayed or if necessary,
enter each value specified by your cable provider with [ Numeric buttons ] .
When the operation is completed, the channel at the lowest position will be displayed.
TV>IP
Ensure the network connections and network settings are completed.
Functions > TV>IP > TV>IP client connection
Network > Network settings
Set TV>IP configuration to tune the digital channels.
When the operation is completed, the channel at the lowest position will be displayed.
Scans the suitable frequency for the selected satellite.
Full :
Scans the whole frequency range.
9. Select Auto Setup and press [ OK ] .
(Settings are made automatically.)
= Note =
1. Select Auto Setup and press [ OK ] to access.
2. Set the scan mode, etc. (Cable)
Quick :
Scans the suitable frequency in your country.
Full :
Scans the whole frequency range.
3. Select Auto Setup and press [ OK ] .
(Settings are made automatically.)
1. Select Auto Setup and press [ OK ] to access.
2. Select a server from Server List and press [ OK ] to access.
3. Select Client and press [ OK ] to access.
4. Set TV>IP Search Mode to start Auto Setup .
- 92 -
Bekijk gratis de handleiding van Panasonic TV-42Z90BE6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TV-42Z90BE6 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 11491 MB |
