Handleiding
Je bekijkt pagina 20 van 32
English - 19 -
Now when you switch your TV on your soundbar will
also switch on. The TV speakers will be automatically
switched o.
Soundbar/Receiver Settings
Once you have setup your soundbar or receiver you
will now see either Soundbar or Receiver in the
Equipment Control menu. This will show you all the
settings for your device.
Highlight Soundbar or Receiver and press Select.
You will now see a list of settings.
Highlight the setting that you wish to adjust and press
Select.
Volume Increments: Set the amount the volume
increases or decreases when you ask Alexa to change
the volume. The default increment is set to 4.
Press Fast Forward or Rewind to increase or
decrease the increments. Press Option to restore
back to default settings.
Infrared Options: Changes the infrared options. IR
Prole, Timing, Repetition and IR Controller options
will be available.
Power Controls: Adjusts the power on/o settings
for your soundbar or receiver. Power On Delay and
Power Control options may be available.
Fire TV Input: Change the input, to which your
soundbar or receiver will switch to for watching Fire TV.
Change Soundbar/Change Receiver: If you
would like to change the soundbar or receiver that’s
connected to your TV highlight Change Soundbar/
Change Receiver and press Select. To remove the
device highlight Change Soundbar/Change Receiver
and press the Option button.
Restore Soundbar Defaults/Restore Receiver
Defaults: Restores all the settings that you may have
changed back to factory defaults. This option will be
available if you change the default settings.
Advanced Settings
Adjust the power timing if your soundbar or receiver
does not switch on/o.
Press Fast Forward or Rewind to increase or de
-
crease the increments.
Press Option to restore back to default settings.
Live TV
This menu allows you to tune in your TV, manage the
channels, set up a CI card and set parental controls.
Highlight Live TV and press Select.
Channel Scan
You should have already tuned in your TV during the
initial setup process. But if you skipped the channel
scan step or if you need to retune your TV follow these
instructions.
Highlight Channel Scan and press Select.
You will be prompted to check that your aerial is set up
and that the cable is plugged properly into the antenna
input socket on your TV. Press Select to proceed.
Select your scanning preference to install channels.
Terrestrial and Cable options will be available.
If the Terrestrial option is selected, the TV will search
for digital terrestrial broadcasts. Select the search
method on the next screen and press Select to start
the search. If you continue with the manual scan, you
will need to congure the Frequency and UHF Band
options before starting the scan.
If the Cable option is selected, the TV will search for
digital cable broadcasts. On the next screen, select the
cable provider, if any available, or the search method,
then press Select to start the search. You may need
to congure the Network ID and Frequency options
before starting the scan.
When you are nished, press the Play/Pause button.
The TV will start to search available broadcasts.
You will be asked at some point whether you want to
clear existing channels, if you have installed channels
previously using the same search option. Highlight
Yes, Clear Channels and press Select. All the
previously tuned in channels will be deleted. Highlight
No, Keep Channels and press Select to proceed
without clearing existing channels.
While the search continues you can press the Select
button to cancel. When the search is completed the
results will be displayed. You can choose to make
changes on the channel list or rescan at this point.
Highlight Done and press Select to nish the setup.
Automatic Service Update
You can allow your TV to automatically scan for
network operator changes when TV enters standby
mode. Press Select to turn this feature on and o.
Favourite Channels
You can view and manage your favourite channels
here.
Highlight Favourite Channels and press Select.
If you do not have any favourite channels go to Manage
Channels menu to add channels by pressing the
Select button. Then select the channel source to view
the channel list. Highlight a channel and press Select
to add this channel to your favourites. You can make
multiple selections.
If you have priorly added channels to your favourites
you can press Select to select the channels you want
to remove from your favourites.
Bekijk gratis de handleiding van Panasonic TV-40S55AEY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TV-40S55AEY |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 4370 MB |
