Handleiding
Je bekijkt pagina 82 van 191
82
English
Note
●
When EAP is used, this unit needs to be configured
according to the settings of the RADIUS server.
For the settings of the RADIUS server, consult with
the network administrator.
●
When [EAP] is set to [EAP-TLS], set [Date and time]
(see page 77) and register the certificate on the WEB
browser control. (see page 109)
[MAC address]
Displays the MAC address of this unit.
■ [LAN setup]
Version 1.5000 and later (after IPv6 compatible)
Configure the IPv4/IPv6 settings.
Select [LAN setup] with
and press <ENTER>.
00:0B:97:41:03:05
LAN setup
EAP
IP Version IPv4 & IPv6
IPv4 settings
IPv6 settings
Command port
User name
MAC address
Password
None
1024
[IP Version]
Set the LAN operation mode.
[IPv4]: Operates in IPv4 mode.
[IPv6]:
Operates in IPv6 mode.
[IPv4 & IPv6]: Operates in both IPv4 and IPv6
modes.
[IPv4 settings]
Detailed network settings for IPv4 can be made.
192.168. 0. 8
255.255.255. 0
192.168. 0. 1
IPv4 settings
Save
DHCP Off
IP address
Subnet mask
Gateway
[DHCP], [IP address], [Subnet mask], [Gateway]
Press to set [On] / [Off] of [DHCP].
When [Off] is selected, IP address and other settings
can be set manually.
[DHCP]:
(DHCP client function)
[On]:
Obtains an IP address automatically when a DHCP
server exists in the network the Display is going to
be connected.
[Off]:
When a DHCP server does not exist in the network
the Display is going to be connected, set [IP
address], [Subnet mask] and [Gateway] manually.
[IP address]:
(IP address display and setting)
Enter an IP address when DHCP server is not
used.
[Subnet mask]:
(Subnet mask display and setting)
Enter a Subnet mask when DHCP server is not
used.
[Gateway]:
(Gateway address display and setting)
Enter a gateway address when DHCP server is
not used.
Note
●
When [DHCP] is set to [On], the IP address, etc.
will be displayed in grey.
Entering numbers
0 0 0
. .
0 0 81 9 2 1 6 8
.
IP address
1. Select the address and press <ENTER>.
2. Select digits with
.
3. Change numbers with
.
4. Press <ENTER>.
You can cancel the change by pressing
<RETURN>.
Select [Save] and press <ENTER>.
Save the current network Setup.
Note
●
To use a DHCP server, make sure the DHCP
server is started.
●
Contact your network administrator for details on
[IP address], [Subnet mask] and [Gateway].
●
Shipping condition
[DHCP]: Off
[IP address]: 192.168.0.8
[Subnet mask]: 255.255.255.0
[Gateway]: 192.168.0.1
[IPv6 settings]
Detailed network settings for IPv6 can be made.
Press to set [Auto setting] and [Temporary
address] to [On] or [Off].
IPv6 settings
Auto setting
Save
Temporary address
Off
Prefix length
Off
64
IP address
Gateway
2001:0d0d:111:ffff:1111:ffff:1111:ffff
2001:0d0d:111:ffff:1111:ffff:1111:aaaa
Bekijk gratis de handleiding van Panasonic TH-75SQ2HW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TH-75SQ2HW |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 26224 MB |
