Handleiding
Je bekijkt pagina 21 van 42
English - 20 -
When eARC is enabled from the sound menu, TV
first tries to establish eARC link. If eARC is supported
by the connected device, the output turns into eARC
mode and the “eARC” indicator can be observed on
the connected device’s OSD. If an eARC link cannot
be established (for example, the connected device
is not supporting eARC but supporting ARC only) or
if eARC is disabled from the sound menu, then TV
initiates ARC.
For eARC to function properly;
• The connected audio device should also support eARC.
• Some HDMI cables do not have enough bandwidth to
carry high-bit-rate audio channels, use an HDMI cable
with eARC support
(HDMI High Speed Cables with
Ethernet and the new Ultra High Speed HDMI Cable
- check hdmi.org for latest info).
• Set the Sound Output option in the Settings>Sound
menu to HDMI ARC. The eARC option in the Sound
menu will be enabled. Check to see if it is set to On.
If not, set it to On.
Note: eARC is supported only via the HDMI2 input.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with
the TV. The volume can be controlled using the re
-
mote control of the TV. To activate this feature set the
Sound Output option in the Settings>Sound menu
as HDMI ARC. When HDMI ARC option is selected,
CEC option will be set as Enabled automatically, if it
is not already set. The TV speakers will be muted and
the sound of the watched source will be provided from
the connected sound system.
Note: The audio device should support System Audio Control
feature.
Game Mode
You can set your TV to achieve lowest latency for
games. Go to Settings>Picture menu and set the
Mode option to Game. Game option will be available
when the TV’s input source is set to HDMI. When set
the picture will be optimised for low latency.
Auto Low Latency Mode
You can also enable the ALLM (Auto Low Latency
Mode) option in the Settings>Devices menu. If this
function is enabled the TV automatically switches the
picture mode to Game when ALLM mode signal is
received from the current HDMI source. TV switches
back to previous picture mode setting when the ALLM
signal is lost. So you won’t need to change the settings
manually.
If the ALLM option is enabled, picture mode can not
be changed as long as ALLM signal is received from
the current HDMI source.
In order for the ALLM feature to be functional the
related
HDMI source setting should be set to Enhanced. You can
change this setting from the Settings>System>Sources
menu.
E-Manual
You can find instructions for your TV’s features in the
E-Manual.
To access the E-Manual, enter the Settings>Sys
-
tem>More menu, select Manuals and press OK. For
quick access press the Settings button and then the
Info button.
By using the directional buttons select a desired
topic and press OK to read instructions. To close the
E-Manual screen press the Back/Return, Exit or
TiVo button.
Note: Depending on model, your TV may not support this
function. The content of the E-Manual may vary according
to the model.
Bekijk gratis de handleiding van Panasonic TB-43W60AEY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TB-43W60AEY |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 5372 MB |
