Panasonic TB-40S45 handleiding

18 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 13 van 18
English - 12 -
Configuring Wired Device Settings
Network Type
The Network Type can be selected as Wired Device,
Wireless Device or Disabled, in accordance with the
active connection to the TV set. Select this as Wired
Device if you are connecting via an Ethernet cable.
Internet Speed Test
Highlight Internet Speed Test and press the OK
button. TV will check the internet connection bandwidth
and display the result when complete.
Advanced Settings
Highlight Advanced Settings and press the OK
button. On the next screen you can change the IP and
DNS settings of the TV. Highlight the desired one and
press Left or Right button to change the setting from
Automatic to Manual. Now you can enter the IP and
/ or DNS values manually. Select the related item in
the drop down menu and enter the new values using
the numeric buttons of the remote. Highlight Save and
press the OK button to save settings when complete.
Networked Standby Mode
You can enable or disable the Networked Standby
Mode feature by setting this option accordingly. Refer
to the Networked Standby Mode section for further
information.
Wireless Connectivity
To Connect to a Wireless Network
The TV cannot connect to the networks with a hidden
SSID. To make your modem’s SSID visible, you should
change your SSID settings via the modem’s software.
1
1
Broadband ISP connection
A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands is designed to
increase bandwidth. These are optimized for smoother
and faster HD video streaming, file transfers and
wireless gaming.
• The frequency and channel differ depending on
the area.
• The transmission speed differs depending on the
distance and number ofobstructionsbetweenthe
transmission products, the configuration of these
products,theradiowaveconditions,thelinetraffic
andtheproductsthatyouuse.Thetransmissionmay
alsobecutofformaygetdisconnecteddepending
ontheradiowaveconditions,DECTphonesorany
otherWLAN11bappliances.Thestandardvaluesof
thetransmissionspeedarethetheoreticalmaximum
valuesforthewirelessstandards.Theyarenotthe
actualspeedsofdatatransmission.
• Thelocationwherethetransmissionismosteffective
differsdependingontheusageenvironment.
• TheWirelessfeatureoftheTVsupports802.11a,b,g
& n type modems. It is highly recommended that
you should use the IEEE 802.11n communication
protocol in order to avoid any possible problems
whilewatchingvideos.
• You must change your modem’s SSID when there
areanyothermodemsaroundwiththesameSSID.
Youcanencounterconnectionproblemsotherwise.
Useawiredconnectionifyouexperienceproblems
withawirelessconnection.
Configuring Wireless Device Settings
Open the Network menu and select Network Type as
Wireless Devicetostartconnectionprocess.
Highlight the Scan Wireless Networks option and
press OK to start a search for available wireless
networks.Allfoundnetworkswillbelisted.Highlight
your desirednetworkfrom the list and press OK to
connect. A network with hidden SSID can not be
detected by other devices. If you want to connect to
a network with hidden SSID, scroll down the list of
detected wireless networks, highlight the Add New
Network option and press OK. Enter the name of the
network and select the security type using the related
options to connect.
Note: If the modem supports N mode, you should set N
mode settings.
Iftheselectednetworkispassword-protected,enter
thecorrectkeybyusingthevirtualkeyboard.Youcan
usethiskeyboardviathedirectionalbuttonsandthe
OK button on the remote control.
WaituntiltheIPaddressisshownonthescreen.
Thismeans thatthe connection isnow established.
To disconnect from a wireless network, highlight
Network Type andpressLeftorRightbuttonstoset
as Disabled.
If you have connected to a wireless network the Dis
-
connect option will appear in the Network menu and
your wireless network profile will also be saved, thus
your TV will connect to the same network automati-

Bekijk gratis de handleiding van Panasonic TB-40S45, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkPanasonic
ModelTB-40S45
CategorieTelevisie
TaalNederlands
Grootte2173 MB