Handleiding
Je bekijkt pagina 9 van 32
9
TQBM2030
9
External equipment
Preparation
• Disconnect the AC power supply cord.
• Turn off all equipment and read the appropriate
operating instructions.
Note:
• Do not bend cables at sharp angles.
• Components and cables are sold separately.
• Turn off the equaliser or reduce the volume of the external
device. High level of input signal can distort the sound.
Using the optical input
You can connect a TV, VCR, DVD player etc., and listen to
the audio through this unit.
1 Connect an external device.
2 Turn on the unit.
3 Press [INPUT SELECTOR] repeatedly to select
“OPT”.
4 Play the external device.
Note:
• This system supports linear PCM signal.
• Supported Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz,
88.2 kHz, up to 96 kHz
• The sound is muted or noise could occur if the signal format
or frequency is not supported.
• If there are sounds coming from the TV’s speakers,
decrease the volume of the TV to its minimum.
Using the auxiliary input
1 Connect an external device.
Plug type: Ø 3.5 mm ( ″) stereo
2 Turn on the unit.
3 Press [INPUT SELECTOR] repeatedly to select
“AUX”.
4 Play the external device.
Connecting additional units
You can connect to additional units to enjoy sound output
from these units.
It is recommended to place all units vertically.
Preparation
Turn off all the units and turn [VOLUME] of each unit to
reduce the volume level.
1 Connect main unit and all the additional units
(SC-BMAX10 or SC-BMAX5) with audio cables (not
supplied).
Plug type: Ø 3.5 mm ( ″) stereo
2 Turn on all the units.
3 On the additional units:
Press [INPUT SELECTOR] repeatedly to select
“AUX”.
4 Press [SPEAKER MODE] repeatedly to select the
desired speaker channels.
5 On main unit:
Start your desired playback.
Note:
• You can connect this unit and up to two additional units.
• The sound effect will be controlled separately by each unit.
Make the same sound settings on the additional units if
necessary.
• The illumination and strobe lights effects on the additional
units may differ from the main unit even when same
illumination pattern is selected.
Optical digital audio
cable (supplied)
Rear view
TV (not supplied)
Rear view
Audio cable
(not supplied)
L+R Left and right channels
When all the units are to play simultaneously.
L Left channel
To achieve stereo sound effect, setting for unit
place on the left side.
R Right channel
To achieve stereo sound effect, setting for unit
place on the right side.
Audio
cable
(not
supplied)
Audio
cable
(not
supplied)
Main unit
(rear)
Additional
unit (rear)
Additional
unit (rear)
ENGLISH
BMAX10_5WW_TQBM2030.book Page 9 Monday, July 22, 2024 3:15 PM
Bekijk gratis de handleiding van Panasonic SC-BMAX10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | SC-BMAX10 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 4220 MB |