Handleiding
Je bekijkt pagina 6 van 60
6
Heating performance
This air conditioner utilizes outside air for heating; its
heating performance reduces as outside temperature
decreases.
→ In the event that heating is not sufcient, please use an
additional heating appliance.
Defrosting
This appliance may start defrosting operation to melt
frost formed in the outdoor unit.
Defrosting starts
: The indoor unit fan stops (or the
speed becomes extremely slow).
→ “
” (STANDBY) appears.
Heating operation resumes after several
minutes
: The indoor unit fan remains stopped (or
it will run at a very slow speed) until the indoor heat
exchanger coil warms up sufciently.
→ “
” (STANDBY) appears.
Defrosting is complete
: The indoor unit fan starts
operation.
→ “
” (STANDBY) disappears.
‘‘DRY’’ operation
Once the room temperature reaches the level that was
set, the outdoor unit repeats the cycle of turning on and
off automatically.
When the room temperature is more likely to reach the
level that was set, the fan speed is set to ‘‘breeze’’ (light
wind) automatically.
Should power failure occur while the unit is
running
The unit will resume operation automatically. Operation
settings prior to power failure will be used.
WARNING
For safety, be sure to turn the air conditioner off and disconnect
the power before cleaning. (Otherwise, electric shock or injury may
result because the fan is rotating at high speed.)
Do not pour water on the indoor unit. (This may damage the internal
components and cause an electric shock hazard.)
CAUTION
Never use solvents or harsh chemicals. Also, do not wipe plastic
parts using very hot water. (This may cause deformation or change
in colour.)
Some metal edges and ns are sharp. Be careful when you clean
those parts. (Injury may result.)
Use a rm stool or ladder when cleaning an indoor unit installed in
high locations.
Maintenance
Operation Mechanism
Outdoor unit
The internal coil and other components of the outdoor
unit must be cleaned periodically.
• Consult your dealer or service center.
NOTICE
This air conditioner incorporates a biocidal product.
Free radicals generated by a device incorporated in the air conditioner have the capacity to inhibit pollutants, such
as certain types of bacteria, viruses, mould.
Active substances : Free radicals generated in situ from ambient air or water.
Usage : This device function can be turned ON / OFF by the “nanoe X” icon button or remote controller settings if
there is no “nanoe X” icon button. Please refer to “How to Use” for more details.
Scan the matrix two-dimensional (2D) barcode on the front page and read the detailed instructions on use.
00_350052_all.indb 6 2022/12/1 13:25:32
Bekijk gratis de handleiding van Panasonic S-90MF3E5AN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | S-90MF3E5AN |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 7521 MB |
