Panasonic RB-F10 handleiding
Handleiding
Je bekijkt pagina 7 van 20
J Charging terminal
R Connect the USB charging cord (supplied) to this terminal when charging. (page 4, “Charging”)
Turning the earphones on and off
n To turn the earphones on
Take the earphones out of the charging cradle.
n To turn the earphones off
Put the earphones into the charging cradle.
n To turn the earphones on and off manually
To power on: Touch and hold the L touch sensor for about 3 seconds to activate the left side,
or the R touch sensor for the right side.
To power off: Touch and hold (L or R) touch sensor for about 5 seconds after disabling
Bluetooth
®
connection from the device.
n Auto power off
If the earphones have not connected the device for 5 minutes continually, earphones power off
automatically.
Connecting to a Bluetooth
®
device
Preparation
R Put the earphones into the charging cradle.
R Place the Bluetooth
®
device within approx. 1 m (3.3 ft) from the unit.
R Check the device operation using its operation instructions as required.
Connecting by pairing (registering) your earphones with a Bluetooth
®
device
for the first time
Important:
R Depending on the connected Bluetooth
®
device, a loud sound may be output during playback.
Check the volume setting of the Bluetooth
®
device before starting playback.
1 Put both earphones (L and R) into the charging cradle and charge.
2 Take both earphones (L and R) out of the charging cradle and wear them.
R The earphones will automatically go into pairing mode by announcing “Pairing”.
7
Before use
Bekijk gratis de handleiding van Panasonic RB-F10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | RB-F10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1484 MB |
