Handleiding
Je bekijkt pagina 13 van 24
Press Start. The timer will start
and then beep twice at the end
of cooking time (the beginning
of standing time). Five beeps
will sound when standing time
is done.
5
5
Set desired standing time
using Number pads (up to 99
minutes, 99 seconds).
4
4
11
Operation (continued)
Setting a Standing
Time
Set cooking time using the
Number pads (see page 10 for
maximum times).
2
2
Some recipes call for a standing
time after cooking. Press Power
Level until the desired power
level appears in the display.
1
1
Setting a Delayed
Start
The start time can be delayed
to start cooking at a later time.
To do this, first press Timer/
Clock (Less).
Enter the desired delay time
(up to 99 minutes, 99 seconds)
using the Number pads.
2
2
1
1
Press Start; the delay time will
count down, then cooking will
begin. At the end of cooking,
five beeps will sound.
5
5
Press Timer/Clock (Less) once.
3
3
Press Power Level until the
desired power level appears
in the display. P10 is the
highest and P1 is the lowest.
3
3
Set Cooking Time using the
Number pads (see previous
page for maximum times).
4
4
NOTES:
1. When each stage finishes, the
oven will beep twice. At the end
of the program, the oven will
beep five times.
2. If the oven door is opened
during Stand Time, Kitchen
Timer or Delay Time, the time
on the display will continue to
count down.
3. Stand Time and Delay start
cannot be programmed
before any automatic function
(such as Sensor Cook/Reheat,
Popcorn and Turbo Defrost).
This is to prevent the starting
temperature of food from rising.
4. When using Standing time or
Delay Start, it’s up to 2 power
stages.
Bekijk gratis de handleiding van Panasonic NN-SN68QB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | NN-SN68QB |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 5025 MB |
