Handleiding
Je bekijkt pagina 33 van 58
33
33
The timer can be used either before or after a cooking program. This feature can be used to set a
standing time after cooking or to delay the start of your cooking.
Set the desired
cooking program, by
selecting power level
and time required.
Press
Timer/Clock
Set desired
standing time using
the dial (max 9 hrs).
Press Start
Cooking program
will commence after
which the standing
time will count down.
1. To Set a Standing Time:
2. To Set a Delay Start:
Using the Timer
Note
1. Three stage cooking can be programmed including standing time.
2. If the oven door is opened during the standing time or minute timer, the time in
the display window will continue to count down.
3. This feature may also be used as a minute timer. In this case press Timer,
set time and press Start.
4. Standing time cannot be programmed after an auto program.
Note
1. Three stage cooking can be programmed including delay start cooking.
2. If the programmed delay time exceeds one hour, the time will count down in units
of minutes. If less than one hour, the time will count down in units of seconds.
3. Delay start cannot be programmed before an auto program.
Press
Timer/Clock
Set delay time using
the dial (max 9 hrs).
Set the complete
cooking program,
by entering
power level and
time required.
Press Start
Delayed time will
count down then the
cooking program will
start.
Bekijk gratis de handleiding van Panasonic NN-GD38H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | NN-GD38H |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 6825 MB |
