Handleiding
Je bekijkt pagina 17 van 64
17
Setting Up Panasonic Kitchen+ App On Your Microwave Oven
Install the latest version of Panasonic Kitchen+ App on your smart device and login with your account.
When this product is powered on for the first time, the Wireless Network module will automatically enter the network configuration mode.
The on the display will start flashing. Users can open the mobile app and follow the prompts to configure the network.
Alternatively, you can enter the Wireless Network function mode by long-pressing the cancel button.
Mode 1*: Start network configuration.
Mode 2: Disconnect Wireless Network.
Mode 3*: Reset Wireless Network. Start network configuration when network did not successfully connected after plugged in.
* If you don't connect wireless network from app, will stop blinking after an hour.
After entering the Wireless Network function mode, use the dial to select from Mode 1 to Mode 3. After selection, press the start button to
execute the corresponding function.
Ensure that home wireless network is on.
Add your microwave oven in Panasonic Kitchen+ App.
Select the wireless network and follow the on-screen instructions to set up your microwave oven.
When on LED display stop blinking and is solid, set up is complete.
Turning Off the Wireless Network Function
1. While in standby mode, press and hold the button for 2 seconds. The display will show "1.SETUP CONNECT".
2. Turn the knob one position to the right. The display will show "2.DISCONNECT WIRELESS NETWORK".
3. Press the Start/Select button to disable the Wireless Network function. The display will show "SUCCESS".
4. Press the button to exit the settings.
How to reset the Wireless Network Function
1. While in standby mode, press and hold the button for 2 seconds. The display will show "1.SETUP CONNECT".
2. Turn the knob two positions to the right. The display will show "3.RESET WIRELESS NETWORK".
3. Press the Start/Select button to reset the Wireless Network function. The display will show "SUCCESS".
About Open Source Software
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0).
(4) open source software other than the software licensed under the GPL V2.0.
The software categorized as (3) - (4) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information
provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of
the corresponding source code covered under GPL V2.0 or the other licenses with the obligation to do so, as well as the respective copyright
notice thereof.
Contact Information: oss-request@cn.panasonic.com
F0003CW90AP_EN (NN-CV88QSAPH)-1024.indd 17 2024/10/24 13:39:31
Bekijk gratis de handleiding van Panasonic NN-CV87QS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | NN-CV87QS |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 11218 MB |
