Handleiding
Je bekijkt pagina 7 van 24
EN6
How to Use
■
Blender
To disassemble
Turn anticlockwise
To assemble
Turn clockwise
1
2
1500
1000
50
1
2
3
Make sure the blender
gasket is not damaged
and placed properly
before assemble.
1 Place the ingredients into blender jug, and then close
the lid.
● Pour liquid first, followed by soft ingredients and
then others. (i) Liquid (ii) Soft ingredients (iii) Hard
ingredients (iv) Ice cubes
2 Attach blender jug to the motor housing.
①
Align the △ on the motor
housing with the ▽ on the
blender jug base.
②
Twist blender jug clockwise
until you hear a click sound.
● Blender jug only can be
attached by above steps.
3 Plug in. Hold the blender jug, and then turn the rotary
switch to "1" or "2" position to start.
● If the appliance stops during
operation. (P. EN8)
● When adding ingredients or
seasonings, remove / attach
inner lid whilst holding the
blender jug. Add ingredients
as shown right.
4 When blending is completed, turn
the rotary switch to "0" position
to switch off.
Unplug.
Turn the blender jug
anticlockwise to remove it,
open the lid and take out the
ingredients.
■
Dry mill
To disassemble
Turn anticlockwise
To assemble
Turn clockwise
2
1
2
1
Make sure the mill
gasket is not damaged
and placed properly
before assemble.
1 Turn the mill container upside down and place
the ingredients in it. Twist the mill container base
clockwise until you hear a click sound.
2 Attach the mill container to the motor housing.
①
Align the △ on the motor
housing with the ▽ on the
mill container.
②
Twist mill container
clockwise until you hear a
click sound.
● Mill container only can be
attached by above steps.
3 Plug in. Hold the mill container, and then turn the
rotary switch to "1" or "2" position to start.
● If the appliance stops during
operation. (P. EN8)
4 When grinding is completed, turn the rotary switch
to "0" position to switch off.
Unplug.
Turn the mill container
anticlockwise to remove
it, open the mill container,
and take out the
ingredients.
1500
1000
50
2
1
1500
1000
500
1500
1000
500
1500
1000
50
1
2
3
1500
1000
50
1
2
3
4
1
2
1
2
3
1
2
3
4
Bekijk gratis de handleiding van Panasonic MX-EP5111, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | MX-EP5111 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 4331 MB |
