Handleiding
Je bekijkt pagina 9 van 26
User Manual
Induction Cooktop – Model: KY-W648CLJPQ
9
To start cooking
1. Tap the OFF/ON controller.
Once turned on, the cooktop will beep once and all displays
will display the "–" or "––" sign, which will indicate that the
induction cooktop has gone into preparation mode.
2. Place a suitable pot or pan over the cooking zone you want
to use.
• Make sure that the bottom of the pot or pan and the
surface of the cooking zone are clean and dry.
3. Set the heating level by tapping the " " or " " control.
• If you don't set a heating level within 1 minute, the
induction cooktop will turn off automatically and you will
need to start over at step 1.
• You can modify the setting of the heating level at any time,
even during cooking by tapping " " or " ".
If the dial flashes alternately with heat level
• This could occur for the following reasons:
• the pot or pan has not been placed correctly in the
cooking zone, or
• the pot or pan in use is not suitable for induction, or
• the pot or pan is too small, or
• the pot or pan is not centered in the cooking zone.
The induction cooktop will not start heating if there is no
suitable pot or pan in the cooking zone.
The display will turn off automatically after 1 minute if there
is no suitable pot or pan over the cooking zone.
USING THE INDUCTION COOKTOP
Bekijk gratis de handleiding van Panasonic KY-W648CLJPQ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | KY-W648CLJPQ |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2051 MB |
