Panasonic ES-CM3B handleiding
Handleiding
Je bekijkt pagina 14 van 371
14
English
Cleaning
• Power off this product and unplug the USB cable from the main body.
• Check that the socket cover is closed.
1
Apply a small amount of hand soap
and water on the system outer foil.
Power on this product, leave it running
for 10 to 20 seconds, and then power
it off�
2
Press the foil frame release buttons to
remove the outer foil section�
(See pages 16 and 17)
Clean this product with running water�
• After rinsing with water, wipe off any
excess water with a dry cloth.
3
Store this product after drying it.
a
Remove the outer foil section and the
shell, thoroughly dry the main body.
• Leave this product to dry in the shade,
out of direct sunlight.
b
After this product is dried completely,
install the outer foil section and the
shell onto the main body.
• Refer to pages 16 and 17 and the following schematic diagram
for the method of installation and removal.
• Perform the following operations after installing the outer foil section
onto the main body:
To disassemble the shell:
1 Hold the enclosure and forcefully
squeeze both sides of the enclosure.
2 Hold the gray part in the gure with the
other hand and gently pull it upwards.
3 Pull the enclosure down.
①
①
②
③
Bekijk gratis de handleiding van Panasonic ES-CM3B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | ES-CM3B |
| Categorie | Scheerapparat |
| Taal | Nederlands |
| Grootte | 31520 MB |
