Panasonic ER-CDT1 handleiding
Handleiding
Je bekijkt pagina 9 van 107
9
English
Maintenance
• Make sure that the main body is turned off.
•
After cleaning, store the head with protective cap, eyebrow comb and
beard comb attached.
How to clean
►With water
1.
Remove the connector, head, attachment, outer foil frame and blade*.
*Blade : For eye brow trimmer
2. Rinse them with running water. (Fig. 9)
3. Shake up and down several times to remove the water.
• Be careful not to hit the appliance on the sink or any other object
while draining the water.
4. Wipe off the water with a dry cloth and dry it well.
• Allow the head to dry in the shade, avoid direct sunlight.
• Do not dry the appliance with a dryer or a fan heater.
Notes
•
Do not wipe with thinners, benzine, alcohol etc. Doing so may cause
malfunction, or cracking or discoloration of the parts.
►With the cleaning brush
1. Remove the attachment, outer foil frame and blade*.
*Blade : For eye brow trimmer
2. Brush off any hair trimmings. (Fig. 10)
Removing and mounting the blade
• Make sure that the main body is turned off.
►Removing (Fig. 11-1)
1
Slide the blade locker as indicated by the arrow.
• It is easier to slide it with your nail.
2
Remove it in the arrow direction.
• You can remove it easily by raising the protrusion (c) with your
ngernail.
• Be careful not to drop the blade.
►Mounting (Fig. 11-2)
1
Insert the tiny hook (e) on the top of the head into the
hole (d) of the blade.
2
Slide the blade locker as indicated by the arrow.
• It is easier to slide it with your nail.
Removing and mounting the frame
(Fig. 12)
• Make sure that the main body is turned off.
Remove the frame from the head.
Mount frame to the head until it clicks.
Removing and mounting the inner
blade (Fig. 13)
• Make sure that the main body is turned off.
Remove the inner blade from the head.
Mount frame to the head until it clicks.
Lubrication
1. Apply one drop of lubrication oil to each of the blade and outer foil.
(Fig. 14)
2. Turn on the power and allow it to run for a few seconds .
3. Turn off the power and wipe off any excess lubrication oil from the
blade and outer foil with a soft cloth.
Bekijk gratis de handleiding van Panasonic ER-CDT1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | ER-CDT1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10286 MB |
