Panasonic AV-UHS500 handleiding
Handleiding
Je bekijkt pagina 93 van 188
93
Basic operations
Waveform monitor settings
WFM (waveform monitor) settings
1Press the [WFM/VECT] button among the display mode
buttons to display the waveform monitor on the built-in
display.
2Press the
CONF
SYS
button to light its indicator, and display
the Config menu.
3Use [F1] to display the WFM sub menu.
4Use [F2] to select the method to be used to display the
signal waveforms using the Style item.
Parade The signal waveforms are arranged and
displayed.
Overlay The signal waveforms are superimposed onto
each other and displayed.
5Use [F3] to select the signals whose waveforms are to
be displayed using the Mode item.
YPbPr Waveforms of the Y, PB and PR signals are
displayed.
RGB Waveforms of the R, G and B signals are
displayed.
Y Waveforms of the Y signal only are displayed.
VECTOR (vectorscope) settings
1Press the [WFM/VECT] button among the display mode
buttons to display the vectorscope on the built-in display.
2Press the
CONF
SYS
button to light its indicator, and display
the Config menu.
3Use [F1] to display the Vector sub menu.
4Use [F2] to select the color bar reference marker using
the Bar Target item.
75% The 75% color bar reference marker is
displayed.
100% The 100% color bar reference marker is
displayed.
Bekijk gratis de handleiding van Panasonic AV-UHS500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | AV-UHS500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24239 MB |
