Panasonic AV-UHS500 handleiding
Handleiding
Je bekijkt pagina 69 van 188
69
Basic operations
Recalling the operations stored in the
memory (Recall)
STORE
DEL
VMEM
MACRO
EDIT
SHOT
MEM
BKGD
PATT
XPT
DSBL
TAKE
ENTER
7
NEW
8
COPY
9
PASTE
4
INS
5
DEL
6
MOD
1
<
2
>
3
REV
0/10
<<
.
>>
C
UNDO
CAM
PMEM
CAM
CONT
EVENT
MEM
KEY
PATT
-/+
PAGE
RE
CALL
MEMORY / WIPE PATTERN / 10 KEY
STILL 1 STILL 2
TRIM IN
REC
CLIP 1 CLIP 2
TRIM OUT
< >
REV
<< >>
TRIM OFF PLAY
STOP
1Press the [SHOT MEM] or [EVENT MEM] button of the
memory whose operations are to be recalled.
Depending on the operation that was performed last,
the [STORE] button, [RECALL] button, [DEL] button or
[EDIT] button lights.
2Select the bus (ME, DSK, AUX, CBGD, CLIP, MENU,
XPT or OTHER) to be recalled from the memory.
From the Shot Memory menu (or Event Memory menu),
select the Target Select sub menu, and then select “On”.
From the Macro menu, select the Store Select sub
menu, and then select “On”.
Refer to “Selecting the buses whose settings are to
be registered and or played back”.
3When selecting materials using the crosspoint
buttons on the operation panel instead of using the
registered “Material selection” item materials, press the
[XPT DSBL] button to light its indicator in red.
Refer to “Memory registration”.
4Press the [RECALL] button.
The [RECALL] button turns amber.
5Press the
-/+
PAGE
button, and press the number key (1 to
10) corresponding to the page number.
6Press the number key (1 to 10) corresponding to the
number for the memory whose operations are to be
recalled.
p In the case of a shot memory, the video effects are
recalled, and playback starts.
During playback, the number key corresponding to the
memory number blinks in green.
p In the case of an event memory, the events are
recalled, and playback starts.
During playback, the number key corresponding to the
memory number blinks in green.
If there is a PAUSE event, playback pauses at that
event, and the number key corresponding to the
memory number blinks in amber.
Each time the number key corresponding to the
memory number is pressed, playback or pause is
selected alternately, and this selection is repeated.
7When playback of the effects or events in the recalled
memory number starts, the
C
UNDO
button is enabled, and
its indicator lights up. If this button is pressed during
playback, playback is terminated.
Bekijk gratis de handleiding van Panasonic AV-UHS500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | AV-UHS500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24239 MB |
