Panasonic AV-UHS500 handleiding
Handleiding
Je bekijkt pagina 29 van 188
29
Preparations
List box:
1Press [F2] to [F5] to display the list box.
2Turn [F2] to [F5] clockwise or counterclockwise to select
the setting.
The setting of an item whose selected setting does
not blink will be reflected in the unit as soon as it has
been selected.
The setting of an item whose selected setting blinks
is reflected in the unit by pressing [F2] to [F5].
3Press [F2] to [F5] again to close the list box.
Selector button:
When a rotary encoder [F2] to [F5] is pressed, the setting
is switched between “On” and “Off.”
Execution buttons:
When a rotary encoder [F2] to [F5] is pressed, the
corresponding function is executed.
Numeric value input box:
Turn a rotary encoder [F2] to [F5] to change the numeric
value.
When a rotary encoder [F2] to [F5] is held down, the
numeric value is returned to its initial value.
A numeric value bar is displayed and its display is linked to
the numeric value.
Inputting numeric values using the number keys
1Press [F2] to [F5] to establish the mode in which
numeric values can be input using the number keys.
Use the
.
>>
button to input the decimal point.
If a numeric value has a decimal point which is not
input, it will be treated as an integer, and its decimal
places will be set to zero (“0”).
Press the
-/+
PAGE
button to switch the numeric value
between a positive and negative value. Each time
this button is pressed, the numeric value is switched
from positive to negative (or vice versa).
If the
C
UNDO
button is pressed when a numeric value
has been input, the numeric value will be returned to
the value prior to the change.
2Input the numeric values using the number keys, and
press the [TAKE ENTER] button.
The values which have been input are entered and
reflected in the unit.
When a numeric value is input using the number keys
and a rotary encoder from [F1] to [F5] is operated, the
input value is cleared, and the numeric value prior to
input is restored.
When a numeric value outside the setting range is
input, the value is invalid and the numeric value prior
to input is restored.
Character input box:
When a rotary encoder [F2] to [F5] is pressed, the
keyboard screen is displayed.
Use rotary encoders [F1] to [F5] or positioner to input the
characters.
Refer to “Keyboard screen operations”.
Bekijk gratis de handleiding van Panasonic AV-UHS500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | AV-UHS500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24239 MB |
