Palmer BRIDGE 4A handleiding
Handleiding
Je bekijkt pagina 5 van 68
5
USER MANUAL
EN
3. To disconnect the device completely from the power supply, unplug the power cable or the power
adapter from the socket. It is not sufficient to press the on/off switch on the device. In addition, a
connected amplifier must also be disconnected from the device!
4. Make sure that the fuse used corresponds to the type printed on the device.
5. Ensure that suitable measures have been taken against overvoltage (e.g. lightning strikes).
6. Observe the specified maximum output current on devices with a Power Out connection. Ensure that
the total current consumption of all connected devices does not exceed the specified value.
7. Replace plug-in power cables with original cables only.
DANGER:
1. Choking hazard! Plastic bags and small parts must be kept out of reach of persons (including
children) with reduced physical, sensory or mental capabilities.
2. Risk of falling! Make sure that the device is securely installed and cannot fall down. Only use suitable
stands or mounts (particularly for fixed installations). Ensure that accessories are properly installed and
secured. Ensure that all applicable safety regulations are observed.
WARNING:
1. Use the device in the prescribed manner only.
2. Operate the device using only accessories of the type recommended and supplied by the
manufacturer.
3. Observe safety regulations applicable in your country during installation.
4. After connecting the device, ensure that all cables are routed so as to avoid damage or accidents,
such as from tripping.
5. Be sure to observe the specified minimum distance to normally flammable materials! Unless explicitly
stated, the minimum distance is 0.3 m.
CAUTION:
Moving components such as mounting brackets pose a jamming hazard.
ATTENTION:
1. Do not install or use the device in the vicinity of radiators, accumulators, stoves, or other heat sources.
Ensure that the device is always installed in such a way that it is sufficiently cooled and cannot
overheat.
2. Do not place any ignition sources, such as burning candles, near the device.
3. Ventilation openings must not be covered and fans must not be blocked.
4. For transport, use the original packaging or packaging provided by the manufacturer.
5. Avoid any impacts to or shaking of the device.
6. Observe the IP rating and the ambient conditions such as temperature and humidity according to the
specifications.
7. Devices can always be further improved. In the event of any discrepancies between the operating
instructions and the device labelling with regard to operating conditions, performance or other device
characteristics, the information on the device always takes precedence.
Bekijk gratis de handleiding van Palmer BRIDGE 4A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Palmer |
| Model | BRIDGE 4A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10631 MB |
