PAG Mini link MPL150 handleiding
Handleiding
Je bekijkt pagina 10 van 25
10
4. Discharging
Barcode & Sensor
4.1 MPL150 batteries can be discharged individually or linked,
regardless of their rated capacity or state of charge.
Gold Mount MPL150 batteries can also be linked to Gold Mount
PAGlink batteries Models 9306 & 9313 for discharging. It is not
possible to link V-Mount MPL batteries with V-Mount PAGlink
batteries, because the linking contacts are located in different
positions.
See Section 6 Battery Linking Features.
4.2 The maximum number of PAGlink batteries that may be linked
has been limited to 10. If more than 10 batteries are linked, the
management system will shut-down the supply, and no current
will flow.
4.3 Linking batteries for discharge provides a number of benefits. The
combined capacity extends the run-time of your camera set-up.
Two linked 150Wh batteries will provide 300Wh.
4.4 Where total continuous consumption is above 10A, two or more
batteries should be linked. This will increase the maximum
continuous discharge current to 12A, provided the batteries are in
a similar state of charge (within 20%). Sharing the current load
across multiple batteries prolongs individual battery life and
provides a better return on investment.
4.5 The batteries’ individual charge status and the total run-time can
be viewed via their displays.
4.6 Batteries of any rated capacity and in any SoC may be added or
hot-swapped in order to achieve continuous running.
4.7 The batteries incorporate a precision, fixed, end-of-discharge
cutoff, set to 12.5V, as measured by the battery. This cutoff will
only operate if the battery capacity is less than 10%, eliminating
unwanted operation due to high current and low battery
temperature.
4.8 MPL150 batteries incorporate a current limit of 10A for an
individual battery, and 12A for linked batteries. Consumption
above this for more than 5 seconds will trigger the over-current
protection, turning the battery output off. It can be recovered by
simply removing it from the load and pressing the display button,
provided the battery still retains some charge.
4.9 The batteries may be discharged within the temperature range
-20°C to +50°C, but for optimum performance, +10°C to +40°C is
recommended. The operating time will be shorter in conditions of
low temperature.
4.10 When the battery has been discharged at a high rate it will
become warm, and it is advisable to let it cool before charging it.
4.11 When not in use, batteries should be kept in an unlinked state to
ensure a lower self-discharge rate.
Bekijk gratis de handleiding van PAG Mini link MPL150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PAG |
| Model | Mini link MPL150 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2875 MB |
