PAC SRK-RAM13HX handleiding
Handleiding
Je bekijkt pagina 1 van 18
SRK-RAM13HX
Radio Replacement Kit
for 2013-2018 RAM Trucks
and 2019-2024 RAM Classic
Stinger HEIGH10
© 2025 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions.
PAC-Audio.com / StingerSolutions.com
Pacific Accessory Corporation
Page 1
Rev: V1
Date: 020725
®
Introduction and Features
Important Notes
Recommended Tools
We recommend reading this manual thoroughly to familiarize yourself with
the entire process prior to beginning the installation.
1. HEIGH10 Display Mounting Panel (RAM13H_BUCKET)
2. Radio Module Mounting Brackets (CDJBRK1_BRACKET)
3. Mounting Plates (RAM13H-8.4 & RAM13H-B) *Not Pictured
4. External Chime Speaker (RPA-SPK)
5. Media Hub (USBCHUB-CH1-RCA-108)
6. AM / FM Antenna Adapter (BAA22)
7. PAC-LINK Interface Module (PL1)
8. CAN-Bus Connection Harness (MQS4PT-CANC)
9. Dierential Video Adapter (RPA-VA1) x2
10. Main Wiring Harness (SRK-RAM13-HAR)
11. RadioPRO Replacement Interface Module (CH4A-SRK)
12. 6” Data Harness (10P-2-10P-6-HAR)
13. Satellite Antenna Adapter (SAT-01)
14. Radio Harness Adapter (SR-SRK-ADAPT-UN1810)
Included Components
1
4
6
10
8
5
2
11
7
9
12
Plastic Panel Tool
7mm Socket
Ratchet
Phillips Screwdriver
T20 Torx
Flush Cutters
1. Does Not Retain:
Cluster Display Features
• Compass (when equipped with 7” or 8.4” screen)
• Clock
• Phone pop-ups
• Navigation pop-ups
Factory Amplier Features
• Speed Controlled Volume
Uconnect Features
• Uconnect Access Remote Start / Lock / Unlock
• SOS / Assist
• Vehicle Location Service
• WiFi-Hotspot
SiriusXM Guardian Services
• SiriusXM Radio
2. EnsurethattheCH4A-SRKandPL1moduleshavebeenupdatedtothelatestversionofrmwarebeforeinstallinginto
thevehicle.RefertotheUpdatingFirmwaresectionattheendofthemanualforrmwareupdateinstructions.
3. The vehicle should be OFF and key removed during entire disassembly and installation. Turning on the vehicle during
the installation may cause error codes / check engine light.
4. To retain SiriusXM Radio, a SXV300 Tuner is required and sold separately.
5. This guide is for UN1810 (HEIGH10) radios. For ix210 radios, see the HORIZON10 / HEIGH10+ Installation Guide.
The SRK-RAM13HX is a complete radio replacement kit with integrated climate control retention for select RAM trucks.
All modules and cables are included to retain important features of the factory system, including: steering wheel-mounted
radio controls, factory reverse camera, USB ports, and AM/FM reception.
Data integration with the vehicle and the Stinger HEIGH10 radio (sold separately) allows for the retention and addition of the
following features: vehicle performance gauges and information, climate controls, vehicle settings, factory amplier control,
and forced camera activation. Simplied installation and setup menus allow direct programming of camera triggers, steering
wheel controls, and other settings of the radio and CH4A-SRK interface.
NOTE: Along with the SRK-RAM13HX components,
additional hardware and wire harnesses from the
HEIGH10 (UN1810) kit will also be used in the
installation. There is a component list, hardware
guide, wire harness descriptions and illustrations
in the UN1810 Installation Guide for reference.
13
14
*Imagesmayvaryfromnalproductionitems*
Bekijk gratis de handleiding van PAC SRK-RAM13HX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PAC |
| Model | SRK-RAM13HX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18646 MB |
