Ozito PXSK-2518 handleiding
Handleiding
Je bekijkt pagina 6 van 11
GENERAL POWER TOOL SAFETY WARNINGS
ELECTRICAL SAFETY
GARDEN SPRAYER SAFETY WARNINGS
WARNING! This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Young children should be supervised to ensure that they do not play with the appliance.
• Do not spray flammable liquids, such as petrol, to reduce the risk of fire or explosion.
• Always follow the chemical manufacturer’s instructions printed on their product labelling for use, cleaning,
and storage. Chemicals should be stored out of the reach of children.
• Do not spray any material where the hazard is not known.
• Do not spray where spark, flame, or other source of ignition is present.
• Do not spray in the direction of people or animals. Always spray downwind.
• Do not smoke, eat, or drink while using the product.
• Do not discharge directly against skin.
• Do not let the spray materials come in contact with skin. If contact does occur, wash immediately with soap
and plenty of water.
• To reduce exposure to spray materials, wear approved safety equipment, such as face mask designed for
spraying, gloves, and other appropriate protective equipment.
• Do not use flammable solvents or abrasive cleaning agents to clean the product.
• Be aware of any hazards presented by the spray materials. Before using any pesticide or other spray
materials with the product, carefully read the label on the original container and follow the instructions.
• Keep the area clear of all bystanders, children, and pets while spraying.
• Remember to properly replace and tighten the spray tank cover after pouring liquid into the spray tank.
• Use only consumer-grade water-based lawn and garden chemicals.
• Do not use commercial-grade chemicals or chemicals for commercial or industrial purposes.
• Do not use caustic (alkali) self-heating or corrosive (acid) liquids with the product. These can corrode metal
parts or weaken the tank and hose.
• Do not leave residue or spray material in the spray tank after using the product. Clean after each use.
• Electric shock hazard. Do not spray towards electrical outlets.
• Aim the nozzle directly at the plants or objects you intend to spray.
• Do not pour hot or boiling liquids into the spray tank. These can weaken or damage the hose or spray tank.
• Do not overfill the tank.
• Always check for leaks. If any are found, correct them before using the product.
• The spray area must be well ventilated.
• Always inspect both the inside and outside of the product before each use.
• Liquids to be sprayed must be as thin as water. Thicker liquids will not spray properly.
• Spray materials may be premixed and poured into the spray tank using a funnel, if necessary.
• When using a measuring container other than the measuring cup, or when using a funnel to fill the tank,
thoroughly clean and rinse these items after use. When premixing spray materials, rinse the container used
for mixing.
• Ensure that the spray materials are directed at an area that will not be damaged by the spray materials.
• Do not spray material onto the unit.
• Avoid spraying on windy days. The spray materials can be accidentally blown onto plants or objects that
should not be sprayed.
• Keep spray materials away from eyes. If spray materials come in contact with the eyes, wash them
immediately with clean water. If irritation is still present, immediately seek medical help.
• The product may be operated with the spray wand handle resting in the cradle, or may be removed from the
cradle and be held by the operator.
• After every use, thoroughly wash your hands and any area where skin has been exposed to the spray.
• Maintain the product. Thoroughly inspect both the inside and outside of the product and examine the
components before each use. Check for cracked and deteriorated hoses, leaks, clogged nozzles, and missing
or damaged parts. If damaged, have the product repaired before use. Many accidents are caused by poorly
maintained products.
WARNING! When servicing, use only identical replacement parts. Use of any other parts
may create a hazard or cause product damage. To ensure safety and reliability, all repairs should
be performed by a qualified service technician.
Danger! Always remove the battery from the garden sprayer:
• when draining, cleaning, or storing to avoid accidental starting.
• when the equipment is left unattended,
• when the equipment is being checked, cleaned, or having maintenance work done,
• when transporting in vehicles.
WARNING! When using electric machines, basic safety precautions, including
the following, should always be followed to reduce risk of fire, electric shock, personal
injury and material damage.
-Read the whole manual carefully and make sure you know how to switch the machine off in an
emergency, before operating the machine. Save these instructions and other documents supplied
with this machine for future reference.
-This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
-This appliance is compatible and only to be used with all batteries & chargers from the Ozito PXC
range. Refer to the PXC battery and charger manuals for information regarding charging, use and
storage.
-Remove the batteries from the appliance before being charged.
-Do not combine different types of batteries or new and used batteries.
-If the appliance is to be stored unused for a long period, the batteries should be removed.
-Do not use modified or damaged batteries.
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this machine. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “machine” in the warnings refers to your mains-operated (corded) machine or battery-
operated (cordless) machine.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate machines in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Machines create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a machine. Distractions can cause you
to lose control.
2) Electrical safety
a) Machine plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) machines. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose machines to rain or wet conditions. Water entering a machine will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
machine. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a machine outdoors, use an extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a machine.
Do not use a machine while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating machines may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source and/or battery pack, picking up or carrying the machine. Carrying
machines with your finger on the switch or energising machines that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before turning the machine on. A wrench or a key left
attached to a rotating part of the machine may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control
of the machine in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from frequent use of machines allow you to become
complacent and ignore machine safety principles. A careless action can cause severe injury
within a fraction of a second.
4) Machine use and care
a) Do not force the machine. Use the correct machine for your application. The correct
machine will do the job better and safer at the rate for which it was designed.
b) Do not use the machine if the switch does not turn it on and off. Any machine that cannot
be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if
detachable, from the machine before making any adjustments, changing accessories, or
storing machines. Such preventive safety measures reduce the risk of starting the machine
accidentally.
d) Store idle machines out of the reach of children and do not allow persons unfamiliar with
the machine or these instructions to operate the machine. Machines are dangerous in the
hands of untrained users.
e) Maintain machines and accessories. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the machine’s operation.
If damaged, have the machine repaired before use. Many accidents are caused by poorly
maintained machines.
f) Keep cutting machines sharp and clean. Properly maintained cutting machines with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the machine, accessories and machine bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed.
Use of the machine for operations different from those intended could result in a hazardous
situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the machine in
unexpected situations.
5) Battery machine use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
b) Use machines only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or machine that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or machine to fire or excessive temperature. Exposure to fire
or temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do not charge the battery pack or machine
outside the temperature range specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the battery and increase the risk of fire.
6) Service
a) Have your machine serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the machine is maintained.
b) Never service damaged battery packs. Service of battery packs should only be performed by
the manufacturer or authorized service providers.
Bekijk gratis de handleiding van Ozito PXSK-2518, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ozito |
| Model | PXSK-2518 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2411 MB |
