Owon OEL15 handleiding
Handleiding
Je bekijkt pagina 22 van 42
17
3. Set voltage range
4. Set the rising/falling slope of power
a) Fast b) Normal c) Slow
5. OCP, OVP, OPP setting
4.4 Input Control function
After the electronic load is turned on, it is in an unconnected (no load) state.
The input switch of the electronic load can be controlled by pressing the
On/Off button on the front panel of the electronic load.
When the On/Off indicator light is on,it means the input is turned on,
and the TFT screen displays the current real-time voltage and current
information.
When the On/Off indicator light is off, the screen will display OFF,
indicating that the input is turned off.
4.5 Keyboard Lock Function
The front panel buttons of the electronic load can be locked by pressing the
shift+On/Off button. The screen will display the LOCK status. In this mode,
all buttons are disabled except for unlocking the function by pressing and
holding the shift+On/Off button.
4.6 Short Circuit Simulation Function
The electronic load can simulate a short circuit at the input terminal to test
whether the protection function of the device under test (DUT) operates
correctly when a short circuit occurs at its output terminal.
To switch to the short circuit state, press (SHIFT) + 1 (SHORT) on the front
panel of the electronic load. The short circuit operation does not affect the
current settings, and pressing (SHIFT) + 1 (SHORT) or MODE again will
return the electronic load to its original set state. The actual current consumed
by the electronic load during a short circuit depends on the current operating
mode and current range. In CC , CP, and CR modes, when the current is
Bekijk gratis de handleiding van Owon OEL15, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Owon |
| Model | OEL15 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6637 MB |
