Owon OEL15 handleiding
Handleiding
Je bekijkt pagina 20 van 42
15
2. Press Enter key to edit resistance setting, turn the knob to directly adjust
to the set value. During the process of inputting a value, pressing the knob
will increment the value to the right. Once it reaches the highest digit,
pressing it again will return to the lowest digit, and this will cycle
continuously.
3. Press On/Off key to output the setting resistance.
In constant resistance mode, the user can also set the following parameters.
Operation steps
1. Press F1 to enter parameter setting interface
2. Set the maximum working current
3. Set voltage range
4. Set the rising/falling slope of resistance
a) Fast b) Normal c) Slow
5. OCP, OVP, OPP setting
4.3.4 Constant Power Mode (CP)
When the user selects the SHIFT+ CC function key, the load enters constant
power mode. The electronic load will consume a constant power, as shown in
the figure below. If the input voltage increases, the input current will decrease.
The relationship between voltage and current is shown in the figure below.
Figure 4.3.4-1 CP mode: The Voltage-Current Relationship Diagram
Bekijk gratis de handleiding van Owon OEL15, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Owon |
| Model | OEL15 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6637 MB |
