Owon OEL15 handleiding
Handleiding
Je bekijkt pagina 16 van 42
11
Figure 4.3.1-2 CC mode operation interface
There are two ways to set the output current (CC mode):
Mode one:
1. Press MODE and rotary the knob to select CC mode.
2. Press ENTER key to edit current setting, turn the knob to directly adjust to
the set value. During the process of inputting a value, pressing the knob
will increment the value to the right. Once it reaches the highest digit,
pressing it again will return to the lowest digit, and this will cycle
continuously.
3. Press On/Off key to output the setting current.
Mode two
：
1. Press CC , at the same time, the user interface will switch into CC mode.
2. Press ENTER key to edit current setting, turn the knob to directly adjust to
the set value. During the process of inputting a value, pressing the knob
will increment the value to the right. Once it reaches the highest digit,
pressing it again will return to the lowest digit, and this will cycle
continuously.
3. Press On/Off key to output the setting current.
In constant current mode, the user can also set the following parameters.
Operation steps:
1. Press F1 to enter parameter setting interface
2. Set the maximum working current
Bekijk gratis de handleiding van Owon OEL15, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Owon |
| Model | OEL15 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6637 MB |
