Overmax AD-10 handleiding
Handleiding
Je bekijkt pagina 18 van 118
EN
AUTOMATIC MEASUREMENT DETECTION
MODE
1.
When the message (abbreviation for „ready”) appears on
the display and the device emits a short sound, take a deep breath
and blow into the mouthpiece attached to the device. Make sure
you exhale air long and steadily (not too fast, at a constant pace)
for about 5 seconds.
2. e device will make a sound, and a message
will appear
on the display. is means that the device has recognized a proper
exhale.
3.
Blow into the mouthpiece until you hear a double click sound,
which indicates that the product has collected the sample needed
for the measurement.
4.
e breathalyzer will start analyzing the collected data. Wait a
moment for the results to appear.
MANUAL MEASUREMENT START MODE
1.
When the message (abbreviation for „ready”) appears on
the display and the device emits a short sound, press the power
switch (3, g. A) to start manual mode.
2. A message will appear on the display, and the device will emit a
continuous sound signal.
3. Take a deep breath and blow continuously into the mouthpiece.
Keep blowing until you hear a double click sound and a message
appears on the display. At this point, stop blowing air.
4.
e device begins to analyze the blown air. Wait a moment, and the
Bekijk gratis de handleiding van Overmax AD-10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Overmax |
| Model | AD-10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6992 MB |
