Otsein-Hoover LB HV16ESALU handleiding
Handleiding
Je bekijkt pagina 27 van 39
Description of controls
All of the buttons and dials on the washing machine control panel are listed below.
When you have selected the desired programme and any option buttons, the information you
have selected will appear on the screen in the Vision Inter@ct display panel.
When programmes and option buttons are compatible a bleeping sound will be heard and the
light above the option button selected remain illuminated. If you select an option button that is
not compatible with the programme you require (e.g. if you choose a cottons wash
programme and try to select “Fast Iron” button - (Planchado Rápido) a buzzing sound will be
heard and the button light will not illuminate. To select an option button press it once in the
lower side; to deselect an option button, press it again.
Carefully read the relevant descriptions detailed below:
Programme Selector Dial
Rotates in both directions
Note: Do not press the start/pause button before
selecting the programme. If this does happen, cancel
the programme (that you have set accidentally) by
pressing the start/pause button for five seconds (See
programme cancelled description).
When you turn the programme selector dial and after the welcome message has
disappeared, you will see a display showing the following details:
Reading from left to right:
1. The programme number
2. The programme name
3. The wash temperature
4. The degree of soiling (how dirty the wash load is)
5. The spin speed
Example
1 WHITE COTTON
90° HEAVY 1600 RPM
Demo mode (default setting - NO)
Please set this option to “No” if not done so already - as this is for SERVICE use only.
If the demo mode option is set to “YES” when exiting the Vision menu the wash programme
WILL NOT commence. Demo Mode must be set at “NO” for the wash cycle to commence.
On entering “No” via the “Timer saver” (Lavado Rápido) button you will then be asked if you
wish to “Exit Menu”.
Exit Menu
If you are happy with the settings you have selected, you can now exit the menu by selecting
“Yes” via the “Extra Rinse” (Super Aclarado) and “Timer saver” (Lavado Rápido) button to
input the selection.
However, if you are not happy with any of the settings selected you must select “No” to the
exit menu command and you can then commence the programming from the beginning. By
pressing the “Timer saver” (Lavado Rápido) button you are able to enter and bypass each
option individually until you reach the option you would like to re-set.
When you are completely satisfied with your menu selection, you may exit the menu and
testing of the installation may now commence.
If, after the initial installation you may want to change any of the menu at a later date, again
run through the menu options from the beginning and change the options you want to reset.
This may be useful to change the “Set New Time” when the clocks go forward or back.
Once set, the menu options will remain in the memory of the machine even if the machine is
unplugged or if a power cut occurs.
5352
A
Bekijk gratis de handleiding van Otsein-Hoover LB HV16ESALU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Otsein-Hoover |
| Model | LB HV16ESALU |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6638 MB |
