Otsein-Hoover LB HV16ESALU handleiding
Handleiding
Je bekijkt pagina 25 van 39
When using your new Hoover Vision for the first time
Your new Vision washing machine incorporates highly sophisticated Inter@ct technology
which always ensures the best performance is achieved automatically. The Vision display
panel is a good example of Inter@ct technology as you can always see in plain English what
the machine is doing both before a wash programme (when you are setting the various
programmes and options) and during a cycle (when the display lets you see the stage the
cycle has reached). In this way, the Vision panel Inter@cts with you and really does serve as
your personal Washing Advice Centre.
This machine will operate prior to programming the Vision set up. However, this machine has
Start Delay and Programme End functions and for these functions to work efficiently the
Vision set must be programmed. This is a simple operation and special care has been taken
during manufacture to ensure that the user can operate this machine simply and effectively.
A quick guide around your Vision menu:
Connect product up to the electric / water supplies and drainage (see pag. 8).
Select any wash programme. After a short time a message will be displayed:
Note: The first message appear in Spanish. See below for changing to English.
4948
HOOVER VISION
BIENVENIDO! 11:05
accurate time can be reset later
1 ALGODÓN BLANCO
90° FUERTE 1600 rpm
this is displayed if prog. 1 is selected
CHOSEN LANGUAGE
ENGLISH
SET TIME MODE TO
ABSOLUTE
if RELATIVE is displayed press
“Extra rinse”
(This changes a menu option)
Prior to entering the Vision pre set, remember time is limited while you decide on your options
(30 sec. / section). If you run out of time start from this point again.
Hold down at the same time the “Timer saver” (Lavado Rápido) and “Extra rinse” (Super
Aclarado) buttons for 5 sec. until screen changes to:
Press “Timer saver”. This confirm and enters an option
Press “Timer saver”
ENABLE FINAL BLEEPING
YES
if NO is displayed press
“Extra rinse”
Press “Timer saver”
SET NEW TIME
hh:
to change hours press the
“Extra rinse” until correct
Press “Timer saver”
SET NEW TIME
mm:
to change mins press the
“Extra rinse” until correct
PPress “Timer saver”
ENABLE MEMORY ?
YES
if NO is displayed press the
“Extra rinse”
Press “Timer saver”
SET DEMO MODE ?
NO
always select NO,
if YES press “Extra rinse”
Press “Timer saver”
EXIT MENU?
YES
if NO is displayed press the
“Extra rinse”
Press “Timer saver”
1 WHITE COTTON
90° HEAVY 1600 RPM
reverts back to the wash programme
selected
You are now able to select any wash programme. You can if you wish also set a delay start.
Where more detailed information is required refer to the relevant section from the following pages.
CAMBIAR LENGUAJE
ESPAÑOL
Press the “Extra rinse” button to change
the language to English.
Bekijk gratis de handleiding van Otsein-Hoover LB HV16ESALU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Otsein-Hoover |
| Model | LB HV16ESALU |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6638 MB |
