Handleiding
Je bekijkt pagina 19 van 60

English-4
3. IMPORTANT: To avoid injury to your fingers or hands from the blender blades,
ensure Jar is installed on base.
4. Turn unit over to access bottom of unit.
5. Remove 4 screws with a Phillips tip screwdriver (Do not use an electric or battery
powered screwdriver). Take note of the locations of the screws.
6. Remove bottom cover, take note of orientation. Take note of orientation and routing
of the battery wires.
7. Remove the larger 2 pin connector first, then remove the smaller 3 pin connector.
8. Carefully remove battery.
DISCLAIMER: Always dispose of the battery responsibly at an authorized recycling
facility.
9. Carefully install new battery in identical orientation as prior one.
10. Reconnect 3 pin connector, reconnect larger 2 pin connector. See Figure 2.
IMPORTANT: Please ensure that you reconnect the 3 pin connector before
connecting the 2 pin connector.
11. Ensure wires are routed per original orientation.
12. Replace bottom cover in original orientation.
13. Replace 4 screws and torque to 42 in.oz/ 3kgf.cm/0.3 Nm.
14. Turn unit over.
15. Ensure sip lid is in place.
16. Verify unit operates as normal by pressing the power button, LED lights should
illuminate per (led chart).
17. Fully Charge before first use.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
This appliance is intended for household use and similar environments such
as:
• Shops, offices, and other similar working environments.
• Ranches and farmhouses.
• Guests in hotels, motels, and other residential environments.
• In bed-and-breakfast-type environments.
Figure 2
3 pin connector
2 pin connector
COOK1989_Oster GOMAX Portable Blender_BLSTGFP Series_25SEFPM2 (LA).indd 4COOK1989_Oster GOMAX Portable Blender_BLSTGFP Series_25SEFPM2 (LA).indd 4 2025/6/27 10:162025/6/27 10:16
Bekijk gratis de handleiding van Oster GoMAX BLSTGFP-M20-000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Oster |
Model | GoMAX BLSTGFP-M20-000 |
Categorie | Blender |
Taal | Nederlands |
Grootte | 7052 MB |