OSEE Argos1600 handleiding
Handleiding
Je bekijkt pagina 45 van 97
Functionalities and Operations
39
Figure 3.3.3 Rename the Signal Source
The length of source name should not be longer than 48 English
characters, and the range is from 0x00 to 0x7F( ASCII), otherwise, there
will be prompts as below:
Figure 3.3.4 Error Prompt for Source Name
In the INPUT configuration table, all the cells except ID item could be
modified.
3.3.2 Set Audio Source
Set the audio source for an audio meter, each audio source is a group of
audio channels which contains the information of two audio channels.
◼ Set audio source
Click each audio meter cell to choose an audio channel source from the
audio type drop down list, you can select analog audio, or EBD group.
When selecting digital audio source, you should tick off the item CH1/2 or
CH3/4 as its value, as shown in
Figure 3.3.5
:
Bekijk gratis de handleiding van OSEE Argos1600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | OSEE |
| Model | Argos1600 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14628 MB |
