OSD Audio Black BK-T69 MKII handleiding

Handleiding

123/ 3

Afdrukken

Je bekijkt pagina 2 van 3

BLACK T69 MKII INSTALL GUIDE

Preparation:

Installation:

Tools For Installation Speaker Wire Guide

Considerations

Cut Out

Placement

Mounting

Connection

Specications:

- Pencil

- Drill

- Tape Measure

- Wire Cutter

- Phillips Screwdriver

- Utility Knife

- Safety Eye Wear

- Gloves

- Sandpaper

- Where is the best place to install the speakers?

- Where do the speakers sound the best?

- Separate the speakers 6 - 10 feet apart.

NOTE: This is the most important part of the entire installation.

If you are not certain whether any obstructions exist behind the

desired mounting area, you should start by cutting a small hole in

the center of your penciled mounting hole with a drywall saw.

Using the Cut Out dimensions measure and trace a template on the

wall in the desired location. Cut along the traced line using a drywall

saw or rotary drill. Use a piece of sandpaper to sand down the cut out

edge for a smoother contour. (See Diagram 2.)

There are many options for proper speaker placement depending

upon speaker type and application. It’s important to carefully plan the

placement of your speakers, as installation requires that you cut a

hole in your wall or ceiling.

(See Diagram 1.) Typical speaker placement for a 5.1 and 7.1

speaker system.

Tighten the mounting brackets by simply turning the screws on

the front of the speaker bafe slowly clockwise. The quick-turn

mounting system and frame will “sandwich” or clamp around the

dry-wall to hold the speaker securely in place once fully tightened

to the locked position. (See Diagram 3.)

When connecting any speakers to the amplier or receiver, always

make sure the power is off. Locate the connection terminals

on the back of your receiver or amplier. Always make sure to

connect audio out from the back of your receiver or amplier to the

speakers. (See Diagram 4.)

NOTE: Not all Amplier/Receivers can safely play more than one

pair of speakers at once. Please refer to your owner’s manual for

impedance and wattage compatibility.

T69 MKII

• Woofer: Two 6.5” Carbon Fiber Cone Drivers

W/ TPR Surround

• Mid Range: Two 6.5” Carbon Fiber Cone Driver

W/ TPR Surround

• Tweeter: One 1” Titanium Dome

• Cloth Magnetic Grille

• Power Handling: 150W RMS / 250W Max

• Sensitivity: 92dB ±2dB

• Freq Response: 65Hz - 20kHz

• Impedance: 4 ohms

• Dimensions: WxDxH 11.61 × 4.92 × 39.37”

• Cut Out: HxW 40.35” x 13.6”

• Weight: 35.71lbs.

18AWG minimum - for distances up to …………………. 10 ft

16AWG - from …………………………………..…... 10 to 50 ft

14AWG - from …………………………………...… 50 to 100 ft

BLACK T69 MKII INSTALL GUIDE

TV

Left Out

Left Speaker

Rec/Amp

Right Out

Right Speaker

- -

+ +

--

++

Locked PositionOpen Position

Diagram 3

Diagram 4

Diagram 2

Diagram 1

123/ 3

Bekijk gratis de handleiding van OSD Audio Black BK-T69 MKII, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Speaker