Oromed ORO-Family Plus handleiding
Handleiding
Je bekijkt pagina 15 van 20
– 15 –
• Attach one end of air tube to the base of the nebulizer.
• Attach the other end of air tube to the tube connector loca-
ted on the front of the compressor.
• Attach mouthpiece or mask per your choice to the top sec-
tion of nebulizer.
• Plug the power cord into an appropriate electrical outlet.
Make sure at this stage, the power switch is at “Off” status.
• Press power switch to begin your prescribed treatment.
Important:
The compressor motor has a thermal protector, which will shut
off the unit before the unit is overheated. When the thermal
protector shuts the unit off, please:
• Switch off the unit.
• Unplug the unit from the electrical outlet.
• Wait 30 minutes for the motor to cool down before another
treatment. Make sure the air openings are not obstructed.
• When treatment is finished, shut off the unit and unplug it
from the electrical outlet.
CLEANING
It is recommended that the nebulizer, mouthpiece and mask be
thoroughly cleaned with hot water after each use and cleaned
with a mild detergent after the last treatment of the day. If your
physician or respiratory therapist specifies a different cleaning
procedure, follow their instructions.
Place cone inside and fill medicaon
Bekijk gratis de handleiding van Oromed ORO-Family Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oromed |
| Model | ORO-Family Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1314 MB |
