Orima ORWK-826-X handleiding
Handleiding
Je bekijkt pagina 12 van 20
· To fill the jug kettle, open the cover by pressing the lid button , then
fill to the desired level (min0. 75L-Max.1.7L), close the lid by pressing
it down until it clicks into place.
· Plug the power supply cord into the main, press the On/Off switch
downwards, the power indicator lights up.
· When the water has boiled the kettle will automatically switch itself
off, you can stop the boiling process at any time by lifting the On/Off
switch. The power indicator will go out.
Note: Do not open the lid when steam is coming out of the spout.
Kettle is only to be used with the stand provided.
Cleaning
· First read the instructions in the section titled “Importance”.
· Avoid using abrasive cleaning agents.
· Empty the kettle and allow to cool, open the lid, lift out the filter, rinse
the filter under warm water and brush off any impurities.
· Refitting is the reverse of removal.
Descaling
· Half fill the kettle with tap water and add the juice of 1 lemon to the
water.
· Boil this mixture and allow it to stand for 15 minutes. Re-boil the
mixture and allow it to stand a further 15 minutes. Re-boil this mixture
a third time then rinse the kettle well.
11
Bekijk gratis de handleiding van Orima ORWK-826-X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orima |
| Model | ORWK-826-X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1500 MB |