Orbegozo WF 1040 handleiding
Handleiding
Je bekijkt pagina 10 van 31
WF 1040
10
Placing the front grille (1)
- Insert the edge of the front grille (1) into the other slot of the connecting ring (2) so that both grilles are
firmly joined together.
- Finally tighten the screw on the connecting ring.
INDICATIONS
- This fan can be tilted up and down by manually moving the head to the desired position.
- To start the fan pull the right cord, with each pull it changes to a higher speed 0 – 1 – 2 – 3 - 0
- To select the fan oscillation mode, pull the left cord, pull again to stop this function.
SOLUTIONS TO SIMPLE PROBLEMS.
- Always check that the plug is properly inserted into the socket.
- Always check if the propeller is touching any other parts such as the protective grids (1, 5).
- If the fan produces noise or vibration, check the following:
If the propeller has been properly mounted on the engine shaft (6).
The rear grill (5) is firmly attached to the engine.
The protective grid has become loose and rubs against the rotating propeller.
CARE, CLEANING AND MAINTENANCE
- Blades and louvers should be cleaned regularly for best performance. Unplug the fan and follow the
assembly instructions in reverse to remove the blades and louvers before cleaning. Wipe with a damp
cloth and dry with a dry towel.
- Never immerse any part in water. Only clean the fan with a damp cloth, then dry it immediately with a
dry towel.
- Always store your fan in a cool, dry place.
Bekijk gratis de handleiding van Orbegozo WF 1040, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | WF 1040 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 3821 MB |
